AL-SC6001Handheld portableVOCTester

The design goal of AL-SC6001 is to benchmark the detection results of GM/MS gas chromatograph and FID hydrogen flame detector, measure the true concentration, and also display the VOC concentration in milligrams per cubic meter of non methane total hydrocarbons. It is different from the PID photoionization VOC instrument you have bought and seen before, AL-SC6001-VOC can change your understanding of this type of instrument; Its accuracy, functionality, quality, and service are highly favored by environmental protection equipment companies and enterprises.

Its price is comparable to imports, but many companies and environmental protection bureaus actively purchase it, which shows how excellent it is

Technical advantages

1. High accuracy:

Full range linearity; Micro measurement capability; Ability to resist humidity interference; Integrate more than 10 industry VOC characteristic factor libraries; Correction for single gas and mixed gas

2. Quick response and recovery:

Rapid recovery after detecting high concentrations; Quick response within 2 seconds

3. Powerful and easy to use:

Real time and historical concentration curve chart function; Marking of testing locations; Convenient selection of gas storage facilities; Supports exporting data via USB, Bluetooth, and email; Emissions Calculation

4. Experienced in measurement:

Positive and negative pressure measurement; Measurement of water spray environment; Measurement of high temperature environment; Interference with gas environment measurement; Ladder assisted carrying

5. Rich accessories:

Practical accessories: high temperature detection rod, spare battery, 25 PTFE filters, etc

Main performance parameters

Main parameters and technical indicators

Range 0-20000ppm or 0-5000ppm

Resolution of 0.001ppm, 1pppb or 0.1ppb

Error<calibration point ± 3%

CF/RF
Correction coefficient integration: correction values for 748 VOC gases, which can be queried through CASNO, Chinese name, English name, and chemical formula
Integration: correction groups for industries such as printing, spraying, painting, pharmaceuticals, rubber, plastics, printing and dyeing, etc

Gas name: Volume concentration, mass concentration, non methane total hydrocarbon concentration, third-party non methane total hydrocarbon concentration

The concentration unit can simultaneously display any unit such as mg/m3, ppm, ug/m3, ppb, LEL, etc

Sampling method: pump suction (built-in air pump)

Pump flow rate 0.4L/min (300-550cc)

Under standard temperature conditions:

-20 ℃~60 ℃ can last for a long time

Working continuously at 60-100 degrees Celsius for 15 minutes; Working continuously for 5 minutes at 100 ℃~400 ℃

Use humidity<95% relative humidity (without condensation)

Optional simple water filter for short-term operation under water mist or portable electronic dehumidifier for long-term operation

scope of application

[Environmental Protection Bureau, Environmental Supervision Brigade]: Use it to evaluate whether the enterprise's emissions meet the standards, whether the treatment efficiency meets the requirements, and whether there is no organization in the factoryVOCWhether it meets the standard

Environmental protection equipment companies, painting, pharmaceuticals, printing

University research experiment

Factory manufacturing and chemical enterprises