Introduction

The ANKOM A200i fiber analyzer can automatically measure cellulose and analyze acidic detergent fiber ADF, neutral detergent fiber NDF, and coarse fiber CF. It uses chemical reagents and hot water for processing. The preparation of the sample is encapsulated using ANKOM's patented filter bag technology and placed into the instrument cylinder. At the same time, the operator only needs to select a simple analysis method and manually add an appropriate amount of solvent and hot water, and the solution is automatically heated and stirred. When the program time is over, the operator only needs to easily remove the filter bag, dry it, weigh it, and complete the entire analysis process.

feature

precise

Eliminating most of the errors caused by human operation, ensuring extremely high accuracy; Consistent with the results obtained from conventional international methods;

efficient

The operation steps are simple and programmed, and the batch processing time is greatly reduced, ensuring speed; At the same time of low energy consumption, 24 samples can be processed in batches at once;

economy

The instrument itself is cheaper than similar products; Can be handled manually, greatly reducing labor costs;

safety

Fully pressure and high temperature resistant sealed cylinder body for digestion.

application

(Applicable to industries such as food, feed, dairy, etc.)

1. Can analyze and determine crude fiber CF, acidic detergent fiber ADF, and neutral detergent fiber NDF

2. Manually add the necessary solution and hot water for rinsing

3. Batch processing can complete up to 24 samples at a time

4. Repeated accurate and precise measurement results

5. Automatic temperature control mixing, eliminating interference from human factors

Technical Specifications

1、 Main technical parameters

1. Follow the principle: international and national standard acid-base digestion methods, using chemical solventsExtract fiber content

2. Scope of application: Standard fiber containing dry samples.

3. Application technology: Filter Bag Technology (FBT)

4. Filter bag structure: three-dimensional structure

5. Filter bag pore size: 25um

6. Intelligence level: Fully automatic precise heating, constant temperature, vortex stirring, manual operationInject/discharge solvent (for digestion), manually rinse/discharge waste liquid in stages.

7. LCD screen time and temperature display

8. Measurement range: 0-100%

9. Sampling range: 0.5-1g

10. Batch processing capacity: 24 pieces

11. Maximum daily processing capacity: 96 (calculated based on 8 working hours per day)

12. Batch processing time: 60-120 minutes (including heating process)

13. Standard deviation of results: ≤± 0.1%

14. Repeatability accuracy (linear coefficient): ≤± 0.5%

15. Temperature range: 100 ℃

16. Temperature control accuracy: ± 0.1 ℃

17. Safety performance: does not contain hazardous glass tube material experimental equipment. manyPoint security monitoring. Sharp temperature and pressure detectors, automatic shutdown temperatureDegree: 115 ℃. The processes of sample digestion, rinsing, filtration, etc. are completely enclosedConducted in a state without any irritating odor escaping from the human bodyDiscomfort. Alloy cylinder body, enclosed environment, manual operation

18. Environmental protection situation: No need to equip a ventilated kitchen, a standard laboratory is sufficient

19. The main material used for the instrument is high-temperature resistant and highly corrosive thickened alloy steel, which meets the requirementsVarious international product quality system certification standards such as EC/CE, CSA, UL, etc

2、 Configuration:

1. 1 semi-automatic fiber extractor host;

2. 1 heat sealer;

3. 2 inert black marker pens;

4. 1000 dedicated inert filter bags