Our company has inspected the vehicles and produced them according to GMP standards, achieving a cleanliness level of 10000. All electrical accessories comply with the provisions of GB1497-85 (Electric Safety Standard) and GB-191 (Packaging Standard).
Instructions for use
1. Move the clean sampling vehicle to the location where sampling is required and fix the sampling vehicle (brake); Connect the power, turn on the power switch, and turn on the fan switch;
2. The fan starts working, adjust the voltage to an appropriate level (usually 220V), wait for the clean sampling vehicle to run for 15 minutes, and then put it into the sampling bucket;
After the sampling is completed, remove the sampling bucket, turn off the fan and power, unplug the power cord, and move the sampling vehicle to its original position.

Main technical parameters: