VIP member
600X600 lane indicator
Product details: Lane indicators are installed in highway tunnels or toll stations to indicate the open and closed status of tunnel lanes or toll stat
Product details
Product details:
Lane indicators are installed in highway tunnels or toll stations to indicate the open and closed status of tunnel lanes or toll station lanes. There are three operation modes: local direct operation, remote PLC direct operation, and remote operation through RS458. Up to 16 tunnel lane indicator signs can be controlled through the RS485 bus, and the address of each tunnel lane indicator sign can be determined by setting a dip switch, thereby achieving remote control of the display status of each tunnel lane indicator sign. The tunnel lane indicator signs have intelligent display status feedback, which is used for remote PLC or other devices to detect the display status, and can timely grasp whether each tunnel lane indicator sign is working properly.
Product performance indicators:
Product size: 300mm * 300mm 400mm * 400mm 600mm * 600mm
Shell material: Sheet metal black chassis, waterproof, dustproof, rust proof, IP65 sealing performance
LED Light Source: Imported Taiwan Crystal Chip LED
LED wavelength: red 625 ± 5 nm, green 505 ± 5 nm.
Single LED brightness: Red 5000~8000 mcd, Green 10000~12000 mcd
Normal service life of LED: ≥ 100000 hours
Viewing angle:>30 °
Working voltage: AC 185V~265V, 50Hz ± 3Hz
Insulation resistance: ≥ 10M Ω
Dielectric strength: withstand voltage 1450V
Working temperature: -30 ℃~75 ℃
Working humidity: 10%~95% RH
Control mode: I/O port or RS485
Visual distance: ≥ 800 meters
Wind resistance: ≥ 1.5KN/㎡
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-