Instrument characteristics:

lThe new generation control system features a 7-inch touch screen that is easy to operate and use.

lDigital display, storage editing up to 200 readings, optional units (COF or grams), RS-232 interface, optional range, mathematical statistics - mean, standard deviation, high/low readings, and optional printer output report

lStatic and dynamic friction coefficients are calculated in one operation

lDirect drive arm with unique slide rail

lPreventing slider offset mechanism

lThe slider is easy to replace

lOptional speed: 5.08cm-43.18cm/min

lOptional sliding distance: 2.54cm-30.48cm

lCompliant with TAPPI T-816, T-549, and ASTM D1894

explain:

The dynamic friction coefficient test helps to quantify the chemicals or additives used to increase or decrease the friction between the two samples being tested. TMI's friction coefficient tester can measure the friction characteristics of many materials, such as paper, film, rubber, plastic, wood, felt, coatings, and other paper materials.

Parameters:

lSize: 51.5cm x 49.5cm x 50.8cm; 20.3 "W x 19.5" D x 20 "H

lPower supply: 120V/60Hz/1Ph/5A (optional: 220V/50Hz/1Ph/3A)

lWeight: Approximately 25 kg. (55 lbs.)

Options and accessories:

l“B”Sliding block; 2.5”×2.5”, 200g, ASTM D1894, TAPPI T-549 (TMI 32-06-02)

lCustomize sliders according to user needs

l180Peel off attachments

lHeating plate: from room temperature to 177 ℃

lLow range sensor for "B" slider