16 station magnetic stirring water bathHCJ-16DThis product can also be customized in different sizes according to customer requirements. Product parameters:

1. Speed: Start -2400r/min

2. Motor power: 25W * 16

3. Working size: 200 * 100mm * 16

4. Temperature range: RT-100 ℃

5. Temperature control accuracy: ± 0.1 ℃

6. Power supply: 220V ± 10% 50Hz ± 10%

16 station magnetic stirring water bathHCJ-16DMain features:

1. The studio water tank is made of stainless steel material, which has some anti-corrosion properties.

2. Adopting intelligent temperature control, temperature control effectgood， LED display microcomputer speed measurement, automatic temperature control.

3. To provide temperature control accuracy, intelligent electronic technology is adopted to improve temperature control accuracy.

4. 16 hole mixing can be controlled separately or synchronized at multiple points; The temperature of the 16 holes can be controlled separately without interfering with each other.

5. The device is easy to operate and safe to use.

6. Using programmable integrated voltage stabilizing and boosting circuit, the speed is stable and not affected by voltage fluctuations.

7. The heater adopts a special molding process, immersion ring heating, and uniform heating. Suitable for experiments at the same temperature but different speeds.

usage method:

1. Before use, please carefully read the instructions, familiarize yourself with the instrument and control panel, and use a megohmmeter to measure whether there is any poor connection or short circuit in the power supply, plug, and grounding. This constant temperature heating solution uses distilled water and prohibits the use of river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the constant temperature sensitivity.

2. When using, water must be added to the pot first, and then the power supply must be turned on. The digital temperature control meter displays the actual measured temperature. Set the desired temperature according to the instrument manual, and observe the reading until it reaches the desired set temperature value. When the set temperature value exceeds the temperature of the water, the heating indicator light will turn on, indicating that the heater has started working. When the temperature of the water reaches the desired temperature, the constant temperature indicator light will turn on and the heating indicator light will turn off.

3. It should be noted that the water in the pot should not expose the electric heating tube to the water surface, in order to avoid burning out the electric heating tube and causing leakage.

4. Place the flask containing the solution stirrer in the pot or directly place the stirrer in the container.

5. Connect the power supply, turn on the power switch, turn on the timer, turn on the mixing switch, and turn the speed control knob to the desired speed.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and wholeheartedly serve people from all walks of life throughout the entire process. Thank you for your attention! Welcome to inquire.

This product is mainly used for distillation, drying, concentration, and temperature staining of chemical or biological products in the laboratory. It can also be used for constant temperature heating and other temperature tests. It can be used for constant temperature heating and other temperature tests, and is a tool for biology, genetics, viruses, aquaculture, environmental protection, hygiene, laboratory, analysis room, education and scientific research.