1、 The Zhisheng brand public electricity intelligent distributor automatically distributes the electricity consumed by public corridors (such as corridor lights, intercom anti-theft doors, etc.) to the electricity meters of each beneficiary user. Take turns connecting one household's electricity meter every day, and the first household's electricity meter will be randomly generated when the power is turned on, achieving the goal of fair sharing of electricity bills. The characteristics of this public electricity intelligent distributor are:External fuses are easy to replace and can display in real-time which household they are evenly distributed to.

2、 Adopting microcomputer microcontroller control, it can automatically detect live users and ensure that the output does not lose power.

3、 The protection and fault detection circuit can automatically detect user wiring errors, improving the reliability of the product.

4、 This product is easy to install, with a flame-retardant plastic shell and a sealed structure. It has been treated with dust-proof and moisture-proof processes, and has good weather resistance.
5、 Targeting the special needs of high-level and multi-level users. Our company can customize multi household, high current dividers. The large terminal post makes electrical wiring convenient and reliable.
6、 Electrical incoming lines do not require A B、CGrouping, can be accessed freely, internal key components (such as relays), with strong lightning resistance and overload resistance.
7、 The power consumption of the device itself (although ≤ 0.5W) also participates in the equal distribution. And automatically detect the number of live households. Allocate power to as many households as possible to ensure that the load does not lose power.
8. Low repair rate, eliminating the advantage of after-sales service for a large number of users

Nine automatic identification wiring

If a user's air switch is disconnected or not connected to the electricity distributor, the distributor automatically recognizes that the user is not using electricity and does not participate in public electricity distribution.

2、 Installation and wiring instructions

Please connect the wires in the order shown in the figure below. Terminals 1-12 should be connected to the phase line of the user's energy meter (i.e. terminal ③ in the figure), terminal 13 should be connected to the phase line, and terminal 14 should be connected to the neutral line. The power supply connected to the distributor should be a single-phase 220V power supply. After installation, please check the wiring for correctness before powering on. After powering on, the power indicator light of the distributor will remain on. At this time, if the common light can light up, it indicates that the distributor is working normally, and the working indicator light will flash.

The installation and wiring of this product strictly prohibit live operation, otherwise the consequences caused by it shall be borne by oneself.