120 * 120 * 20 Rubber Shock Absorber Pad for Small Equipment Rubber Shock Absorber Pad

Rubber shock absorbers The point has both high elasticity and high viscosity. The elasticity of rubber is generated by the conformational changes of its coiled molecules, and the interactions between rubber molecules can hinder the movement of molecular chains, resulting in viscous damping Point, so that stress and strain are often in an unbalanced state.

The dimensions are 120mm in length, 120mm in width, and 20mm in thickness.

The SD type rubber shock absorber pads produced by our factory are made of high-quality natural rubber NR with good elasticity, making a significant contribution to shock absorption in industrial plants.

The product is important Point and purpose

The SD type rubber shear isolation pad is made of oil resistant rubber as the elastic material and is vulcanized and molded. Its wavy surface can reduce the vertical stiffness of the isolation pad. The basic block size of the isolation pad is 84x84x20 (mm). This series of products consists of * specification sizes and three types of rubber hardness isolation pads, with a bearing range from 0.2KN to 6KN. To improve the isolation effect, multiple layers of isolation pads can be used in series, with metal sheets (3mm) separating each layer. The total stiffness of n-layer series isolation pads is 1/n times that of a single layer. Considering vertical stability, the total height of the isolation pads after series connection should not exceed the width of the isolation pads. When the isolated body is relatively light, the isolation pads can be divided into 1/2 pieces for use, and the load-bearing capacity and stiffness of the divided isolation pads are also 1/2 times that of the original. The divided isolation pads can also be used in series again.