1000Maintenance and upkeep of type crusher

1The crusher should be placed in a ventilated position to ensure the heat dissipation of the motor during operation and extend its lifespan.

2Lubricating oil should be regularly added to the bearings to ensure lubrication between them.

3Regularly check the tool screws and use a brand new crusher1After hours, use tools to tighten the screws of the moving and fixed knives, and strengthen the fixation between the blade and the knife holder.

4To ensure the sharpness of the cutting edge of the tool, it is necessary to regularly inspect the tool to ensure its sharpness and reduce unnecessary damage to other components caused by blunt or missing blade edges.

5When replacing cutting tools, the gap between the moving tool and the fixed tool:20HPThe above crushers0.8MMFor the best,20HPThe following crushers0.5MMFor the best. The thinner the recycled material, the larger the gap can be adjusted appropriately.

6Before the second start-up, the remaining debris in the machine room should be cleared to reduce start-up resistance. The inertia cover and pulley cover should be opened regularly to remove the ash outlet under the flange, as the powder discharged from the crusher chamber enters the shaft bearing.

7The machine should be well grounded.

8Regularly check whether the crusher belt is loose and tighten it in a timely manner.