VIP member
Hot and cold tank ingredient tank
Stainless steel hot and cold cylinder batching tank
Product details
| Stainless steel hot and cold cylinder batching tank, steam hot and cold tank mixing tank, electric heating hot and cold bucket cooling tank |
 |
Product Introduction: |
|
Stainless steel hot and cold tank ingredient tank (also known as aging tank), with the advantages of energy saving, noise reduction, corrosion resistance, and strong production capacity, is easy to clean and widely used in the dairy industry, food, pharmaceutical, chemical, beverage and other industrial sectors. It is particularly suitable for heating, cooling, insulation, sterilization or slurry, stainless steel hot and cold tanks, and is a necessary equipment production line for ice cream. |
Technical Specifications： |
Volume (L) |
Motor power (kw) |
Inner layer thickness (mm) |
insulation layer |
Thickness of jacket (mm) |
Outsourcing thickness (mm) |
Jacket pressure (Mpa) |
| 100 | 0.75 | 3 | Asbestos insulation layer | 3 | 0.6 | 0.09 |
| 200 | 0.75 | 3 | 3 | 0.6 | 0.09 | |
| 300 | 0.75 | 3 | 3 | 0.6 | 0.09 | |
| 500 | 0.75 | 3 | 3 | 0.6 | 0.09 | |
| 600 | 0.75 | 3 | 3 | 0.6 | 0.09 | |
| 800 | 0.75 | 3 | 3 | 0.6 | 0.09 | |
| 1000 | 1.1 | 3 | 3 | 0.6 | 0.09 | |
| 1500 | 1.1 | 3 | 3 | 0.6 | 0.09 | |
| 2000 | 1.5 | 3 | 3 | 0.6 | 0.09 |
Steam heating hot and cold cylinder (with lid and stirring) 304 material configuration table: |
| Nominal volume (L) | 300 | 500 | 1000 | 2000 | 3000 | 5000 | 6000 | 8000 | 10000 |
| Inner tank diameter (mm) | 800 | 900 | 1100 | 1400 | 1600 | 1800 | 1900 | 2000 | 2100 |
| Heat exchange area (m2) | 1.7 | 3.0 | 4.5 | 7.5 | 10 | 13 | 15 | 18 | 21 |
| Mixing power (kw) | 0.55 | 0.75 | 1.1 | 1.5 | 2.2 | 3.0 | 4.0 | 5.5 | 5.5 |
| Mixing speed (r/min) | Available speed options: 17, 32, 48, 60, 82, 127, 155, or using continuously variable speed or variable frequency speed regulation | ||||||||
| Work pressure (MPa) | Jacket 0.08-0.3MPa, inner tank: atmospheric pressure | ||||||||
| Working temperature (℃) | Jacket:<138 ℃, inner tank:<138 ℃ | ||||||||
| Equipment material | Stainless steel (SUS304/SUS316); Jacket SUS304/Q235-B; Exterior surface cylinder SUS304 | ||||||||
| container category | According to the design pressure and medium characteristics, it is classified into atmospheric pressure vessels and Class I pressure vessels. | ||||||||
Product Structure: |
 |
Note: The power of the mixing motor in the chart is for reference only. The power of the mixing motor, mixing speed, and mixing blade form depend on the properties of the material. More unlisted volumes outside the chart shall be manufactured according to user requirements. For more detailed information about this device, please contact us by phone. The process parameters required for the selection of ingredient tanks include material properties, working pressure, working temperature, and operating conditions. Technical documents: Randomly provide equipment structural dimension drawings (CAD), installation drawings, product quality certificates, installation and use instructions, etc. |
Product Display： |
 |
 |
 |
 |
Several common structural forms of mixed slurry: We will select the appropriate mixing slurry form and mixing speed according to the characteristics of the mixing material and the user's process requirements. |
 |
Three leaf propulsion type |
Turbine dispersing disk |
Six blade disc turbine type |
 |
anchor |
Flat inclined blade propeller type |
In addition to the above and other forms of mixing slurry, some mixing tanks also use high shear emulsifiers and blade type dispersing mixers (priced separately), relying on their strong mixing force to quickly disperse and mix materials. |
|
|
High speed dispersing mixer:
Motor power: 1.1-75KW Motor speed: 1450r/min (4th level) Motor form: fixed speed motor, variable frequency motor (If a variable frequency motor is required, a variable frequency drive is needed, with a speed range of 0-1450r/min.) |
High shear homogenizer emulsifier：
Motor power: 1.1KW~75KW Motor speed: 1.1kw-18.5kw=2900r/min; 22kw-75kw=1450r/min Motor form: fixed speed motor, variable frequency motor (If a variable frequency motor is required, a variable frequency drive is needed, with a speed range of 0-1450r/min.) |
Our company specializes in producing customized emulsion tanks of various types. We are an experienced factory with good quality and competitive prices. Welcome to inquire |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-