DRX-II-PS (Transient Plane Heat Source Method) Thermophysical Parameter TesterMain features: 1Directly measure transient heat propagation, with testing time between minutes and seconds.

2. Will not be affected by contact thermal resistance compared to static samples

3. No special sample preparation is required, only a relatively flat sample surface is needed

4. Can be used for the determination of thermal properties parameters of solids, powders, coatings, films, liquids, anisotropic materials, etc.

DRX-II-PS (Transient Plane Heat Source Method) Thermophysical Parameter Tester Main Technical Parameters:

1. Thermal conductivity range: 0.005—500 W/mK

2. Temperature range: 10K—1000 K

3. Material types: metal, alloy, ceramic, ore, composite material, silicon wafer, polymer, binder, paper, fabric, printed circuit board, propellant

4. Test modules: Basic, Thin Film, Flat Plate, Anisotropy, Single Side, Specific Heat

5. Probe size: Φ2- Φ30 mm， Specific requirements: Φ50--Φ100 mm

6. Sample types: solid, powder, film, coating, liquid, anisotropic material, etc

7. Accuracy: ± 3%

8. Other tests: Simultaneously measure the thermal diffusion coefficient of materials with an accuracy of ± 5% and the volumetric heat capacity with an accuracy of ± 7%