1、 Characteristics

1. Environmentally friendly refrigerant

2. Plug and play, no installation required

3. Dual isolation design of cold and hot chamber airflow

4. Easy to move, universal wheel design

5. Wide applicability

6. The mobile air conditioner is plug and play, easy to install, maintain, and move as you please. It embodies the characteristics of energy saving, humanity, beauty, and environmental protection, and provides a reasonable solution for ventilation and cooling in electrical cabinets, textile factories, shoe making, plastic workshops, mechanical equipment, warehouses, power plants, waiting rooms, and other environments.

2、 Principle of Mobile Air Conditioner

After the air conditioner is powered on, the low-pressure vapor of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure vapor before being discharged to the condenser. At the same time, the outdoor air drawn in by the axial fan flows through the condenser, taking away the heat released by the refrigerant and condensing high-pressure refrigerant vapor into high-pressure liquid. The high-pressure liquid is sprayed into the evaporator after passing through the filter and throttling mechanism, and evaporates at the corresponding low pressure, absorbing the surrounding heat. At the same time, the cross flow fan continuously allows air to enter the fins of the evaporator for heat exchange, and sends the cooled air into the room after releasing heat.

3、 Scope of application

a. Altitude not exceeding2000m；

b. Applicable environment: Temperature5℃～38℃, non corrosive gas;

c. Existence IIAIIBLevel,T1～T4Explosive hazardous areas formed by the mixture of flammable gases, vapors, and air.

4、 The explosion-proof mark of the entire series of explosion-proof air conditioners is Exdibmb IIBT4.

The execution standards for this series of products are as follows:

GB3836.1-2010 Explosive Atmosphere1Part: General Requirements for Equipment

GB3836.2-2010 Explosive Atmosphere2Part: Composed of explosion-proof shell“d”Protected Equipment

GB3836.4-2010 Explosive Atmosphere4部分：由本质安全型“i”Protected Equipment

GB3836.9-2006 Electrical Equipment for Explosive Gas Atmosphere9部分：浇封型“m”》

GB3836.15-2000 Electrical Equipment for Explosive Gas Atmosphere15Part: Electrical Installation in Hazardous Areas (excluding Coal Mines)