YE4 Three phase Asynchronous Motor Product Overview

The YE4 series high-efficiency three-phase asynchronous motor is a newly upgraded high-efficiency product independently developed by our company, which meets the second level energy efficiency standard in GB18613-2020. The installation dimensions of this product comply with IEC standards and national standards, allowing customers to achieve fast conversion.

The YE4 series motor has the characteristics of beautiful appearance, low loss, low noise, low vibration, safety and reliability, and easy maintenance.

YE4 three-phase asynchronous motor product usage

The YE4 series high-efficiency energy-saving non explosion proof motors are widely used in general mechanical equipment without special requirements, such as agricultural machinery, food machinery, fans, water pumps, machine tools, mixers, air compressors, etc.

Performance parameters of YE4 three-phase asynchronous motor

Power: 0.12~315kW Number of poles: 2, 4, 6, 8

Voltage: 220/380V, 380/660V Frequency: 50Hz

Basic characteristics of YE4 three-phase asynchronous motor

Machine base number: H63-H355

Power: 0.12~315kW

Extremes: 2, 4, 6, 8

Voltage: 220/380V, 380/660V

Frequency: 50Hz

Working mode: S1

Shell: cast iron, fixed feet

Junction box: made of cast iron or steel plate, located at the top of the motor.

Installation methods: B3, B5, B35, V1, etc

Insulation level: F level, assessed according to B level temperature rise

Protection level: IP55

Cooling method: IC411

Wiring: 380V "Y" connection for 3kW and below, 380V "△ connection for machines larger than 3kg

Bearing lubrication: Maintenance free bearings are used for H132 and below, while open type bearings with oil injection and discharge devices are used for H160 and above.

Note: Selection options can be made according to user requirements

Voltage: 230/400V, 400/690V, 415V, 440V, 460V, 480V, etc., can be customized according to user requirements.

Frequency: 60Hz or variable frequency, customizable according to user requirements

Work schedule: S2, S3, customizable according to user requirements

Insulation grade: H grade, can be customized according to user requirements

Protection level: IP65, customizable according to user requirements

Environmental air temperature: -15 ℃~+40 ℃;

Altitude: not exceeding 1000m; (Note: When the ambient air temperature and altitude are different from the above regulations, GB755 shall be followed)

Humidity: The monthly average maximum relative humidity should not exceed 90%. Note: The motor can be customized according to the requirements of the user's usage environment.

YE4 Three phase Asynchronous Motor Ordering Guide

The selection of motors should consider the following factors

Voltage: □ 380V, □ 660V, □ 380/660V, other

Frequency: □ 50Hz, □ 60Hz, □ Other

Installation type: □ IMB3, □ IMB35, □ IMB5, □ IMV1, □ Other

Operating environment: □ Indoor; □ Outdoor; □ Environmental temperature; □ Altitude; □ Other

Protection level: □ IP55, □ IP56, □ Other

Connection method between motor and driven equipment

Work schedule: □ S1, □ Other

Insulation level: □ 155 (F), □ 180 (H), □ Other

Rotation direction: □ clockwise; Counter clockwise; □ Bidirectional

Location of junction box: □ Top of motor facing right (viewed from the shaft extension end); □ Other

Example requirement:

The center height of the machine base is 315132kW. The 2P machine base has feet and no flange on the end cover. It rotates clockwise at 380/660V and has an IP55 protection level and insulation level F. The motor is labeled as YE4-315M-2 132kW 380/660V 50Hz IMB3 IP55 F

If users have special requirements for voltage, frequency, protection level, rotation direction, installation method, biaxial extension, noise, vibration, and connection of junction boxes, technical personnel's consent must be obtained before manufacturing.