UV radiometer/UV radiometer/UV illuminance meter/UV illuminance meter/UV irradiance meter/UV irradiance meter/UV radiation illuminance meter/UV intensity meter

TN2340UVA, UVB Measurement UV Sensor Spectrum 290nm-390nm Hi, Lo Test Range 19990 and 1999 uW/cm2 Header Probe Separation Design for Various Environmental Use Characteristics • Professional High Quality UV Meter • UVA, UVB Measurement • UV Sensor Spectrum 290nm-390nm • Hi, Lo Test Range 19990 and 1999 uW/cm2 • Header Probe Separation Design for Various Environmental Use Applications • Industry: Monitoring Blue Ultraviolet Radiation during Welding, Sunlight Radiation Monitoring, UV Sterilization Graphic Art, UV EPROM Erasure Lithography Exposure • Laboratory: Weathering Research, UV Sterilization Virology, Microbial Genetics, DNA Research, General Laboratory Use

UV radiometer/UV radiometer/UV illuminance meter/UV illuminance meter/UV irradiance meter/UV irradiance meter/UV radiation illuminance meter/UV intensity meterSpecifications display 13mm LCD, 3 1/2 digits, maximum display 1999 range/resolution 2 ranges Hi and Lo Lo: 1999uW/cm2 × 1 uW/cm2 Hi: 19990uW/cm2 × 10 uW/cm2 (1000 uW/cm2=1mW/cm2) Accuracy ± (4% FS+2dkt) FS: Full range * Calibrated on UVA lamp * Specifications tested on electromagnetic field intensity<3V/M, frequency<30MHz Sensor structure High end UV photodiode and UV color correction filter Sampling rate of about 0.4 seconds Over range indicator displays "1" battery 006P DC 9V battery, MN1604 (PP3) power consumption is approximately DC 2.7mA, operating temperature is 0 ℃ -50 ℃, operating humidity is less than 80% RH, size is 131 × 70 × 25mm, sensor head is 68 × 60 × 27mm, sensor handle is 100 × 20mm, dia weight is 220g (including battery). Attachment user manual 1PC sensor 1PC measurement steps: 1) Press the "on/off" button to the "on" position to turn on the instrument (0=off, 1=on). 2) Press "Lo/Hi" to the "Hi" position of the maximum range. 3) Hold the sensor handle so that the sensing probe faces the measured source, and the measured value will be displayed on the screen.

/UV radiation illuminance meter/UV intensity meter

Measurement precautions: 1 If the measured value is less than 2000uW/cm2, please use the "Lo" mode to obtain higher accuracy. 2. The UV probe has a precise structure, please store it in a dry environment when not in use. For example, place the entire probe into a plastic bag with a desiccant and seal the bag opening. This will prolong the lifespan of the probe. Otherwise, it will reduce the sensitivity of the probe. Battery replacement: When "LO BAT" is displayed in the upper left corner of the LCD, it indicates that the battery voltage is between 6.5V and 7.5V, and the battery needs to be replaced at this time. However, the battery can still be used for a few hours afterwards. Remove the battery back cover and replace it with a new 9V battery. Put the lid back on.