The TX series target intelligent flowmeter adopts the latest capacitive force sensor as the measuring and sensitive transmission element, and applies the latest digital technology and microelectronics technology. It is an intelligent flowmeter suitable for measuring fluids and gases with high viscosity, low Reynolds number, and containing small particles. The use of capacitive force sensors is the key to achieving high precision and stability in this product. The TX series target intelligent flowmeter not only has the characteristics of traditional orifice plate, vortex street and other flowmeters without movable parts, but also has measurement accuracy comparable to volumetric flowmeters. In addition to its unique anti-interference and anti impurity performance, it can replace conventional flowmeters and conventional fluid flow measurement, especially in difficult flow measurement conditions such as high viscosity, easy blockage, high temperature, high pressure, and strong corrosion. It has been widely used in flow measurement in various fields such as steel, oil, natural gas, electricity, papermaking, chemical industry, energy, food, and environmental protection.

1、 Scope of application of target intelligent flowmeter

Suitable for various nominal diameters, ranging from DN15 to DN2000mm to larger;

Suitable for high and low temperature media: from -50 ℃ to+260 ℃;

Suitable for low, medium, and high pressure conditions: from 0 to 42MPa (gauge pressure);

2、 Product features of target intelligent flowmeter

1. No movable parts, reduced sealing surface, greatly reducing leakage rate, convenient for installation and daily maintenance;

2. Wide measurement range, with a maximum measurement range of 20:1 (liquid) or 10:1 (gas);

3. Accurate measurement and high precision, flange type can reach 0.2% (liquid) or 0.5% (gas);

4. Extremely high sensitivity, capable of measuring ultra-low flow rates, capable of measuring low flow rates of 0.08m/s, and electromagnetic flow meters of 0.5m/s;

5. Good repeatability, generally 0.05-0.08%, with optional small signal resection, non-linear correction, and selectable filtering time;

6. The pressure loss is small, and the small diameter is only about 1/2 △ P of the standard orifice plate; The pressure loss of DN100 caliber and above has significantly decreased;

7. Calibration is convenient. In addition to using standard equipment for calibration, dry calibration methods can also be used, such as the weight hanging method, which can be completed with a single button operation;

8. The flow range can be changed by replacing the blocking components according to actual needs, and the online detachable plug-in structure can achieve non-stop production, continuous flow maintenance or replacement;

9. Low power battery on-site display, capable of online direct reading of indication values. The display screen can simultaneously read instantaneous flow cumulative flow and percentage bar chart, and can switch to display compensation temperature and compensation pressure indication values;

10. Strong anti-interference and anti impurity capabilities, multiple output forms, able to transmit various parameters remotely, and can be used without mixing heat.