product overview：

The TQ-663 flange type torque sensor adopts a compact flange flange connection design, with one end of the rotor installed on the transmission end and the other end directly connected to the load end, making it easy to install into the transmission system. In addition, the sensor is equipped with a built-in speed measurement unit.

The flange type torque sensor can be directly installed on the transmission equipment. The stator ring is fixed to the outer ring of the rotating rotor and supported by the stator base.

The design of sensor volume, size, material, measurement system, and signal transmission is specifically designed for harsh and complex operating conditions on engine test benches.

Product features:

The TQ-663 strain gauge flange torque sensor is equipped with a digital measurement signal conditioning unit, which directly outputs data in standard analog or digital signal form through contactless transmission. The rotor rotates inside the stator ring and no mechanical bearings are allowed to be used, so there is no wear.

● 0.5 or 0.1 precision level, optional voltage or frequency signal output

High precision magneto electric angle/speed measurement unit, dustproof and moisture-proof

● Realize sensor parameter recognition, setting, measurement, and zero balance through RS-232C interface

The axial dimension is very small

● Compact flange flange connection design

● Digital non-contact signal transmission

No bearings, no maintenance required

● System self-test function

Performance parameters:

1. Range N ∙ m ± 10... 300k Nm

2. Overload capacity: 120%

3. Output signal: 5-15KHZ 0-10V 4-20mA

4. Accuracy level: 0.5% 0.25% 0.1%

5. Power supply: 24VDC

6. Working speed: 0-15000 revolutions per minute

7. Response frequency: 100 μ s

8. Insulation resistance:> 200MΩ

9. Zero drift:< 0.5%

10. Repeatability:< 0.1%

11. Linear:< 0.1%

12. Lag:< 0.1%

13. Environmental temperature:- 40-60℃

14. Relative humidity:< 90%RH

15. Operating temperature range:- 10-70℃

16. Storage temperature range:- 25-80℃

17. Sensor amplitude: 10V

18. Sensor power consumption: ≈ 4W

19. Sensor current consumption: 100MA

20. Response time of dynamic strain wave of strain gauge: 3.2X10-6s

21. Sensor housing: Strong anodized aluminum

Tags: Sensor, Torque Sensor