product overview：

The TQ-661 strain gauge torque sensor is produced by our company through structural optimization and technical improvement based on the TQ-660 torque sensor.

This product has a more compact size and is easier to install, saving customers a lot of space when designing products. The power supply and measurement signals are transmitted in a non-contact manner, suitable for long-term use, low wear, and maintenance free.

Product features:

Internal use of non-contact wireless transmission of torque signal output

● It has the advantages of good stability, high accuracy, good reliability, and long service life

● Can detect dynamic torque and static torque

The torque signal output during measurement is independent of whether the speed is high or low, and whether it rotates or turns

Continuous measurement of positive and negative torque signals without the need for repeated zero adjustment

The signal adopts digital technology and has strong anti-interference ability

There is no wear on the collector ring, and it runs at high speed for a long time

Technical parameters:

1. Measurement range: 0- ± 5 ±10. ±20. ±50. ±100. ±200. ±500.±1000 .

0 ± 2000 ± 50000 ± 10000 ± 20000 ± 30000 ± 50000 ± 60000 ± 100000

0 ± 150000 ± 200000 ± 250000 ± 300000

2. Output signal: 5-15KHz, 0 ± 5V, 4-20mA

3. Working speed: 0-30000 revolutions per minute (any speed is optional)

4. Power supply voltage: 24VDC and ± 15VDC are optional

5. Response frequency: 100 μ S

6. Environmental temperature:- 40-60℃

7. Maximum load: 1.5 times the range

8. Insulation resistance:> 200MΩ

9. Zero drift: 0.5%

10. Accuracy: 0.1 0.25 0.5

11. Repeatability:<0.1% linearity:< 0.1% lag:< 0.1%

12. Relative humidity:< 90%RH

Tags: Sensor, Torque Sensor