Technical Requirements for Type II Concentrator of Low Voltage Power User Centralized Meter Reading System of China Southern Power Grid Co., Ltd. (2016 Edition)
Adopting industrial grade Cortex-M3 series controllers and embedded operating systems.
Excellent electromagnetic compatibility performance, able to resist interference from high voltage spikes, strong magnetic fields, strong static electricity, lightning surges, and has strong environmental adaptability.
The uplink communication with the main station adopts wireless public network mode, compatible with communication methods such as GPRS/CDMA/4G.
The downlink communication adopts RS485 bus, carrier, low-power wireless, etc.
The wide voltage range design makes it more reliable and adaptable to the working environment.
New maintenance concept: With powerful configuration capabilities, device parameters can be easily modified locally/remotely, and online software upgrades are supported,
The large capacity motherboard FLASH storage chip ensures convenient storage of various data.
Operating Voltage |
Single phase 220V |
frequency |
50Hz, Allowable deviation -6%~+2% |
power consumption |
Active power consumption ≤ 3W (non communication), apparent power consumption ≤ 5VA (non communication) |
temperature |
-40℃~+75℃ |
humidity |
Relative humidity 10% -100% |
atmospheric pressure |
63kpa~108kpa (relative altitude below KM) |
Dustproof and drip proof |
Complies with the IP51 anti drip test requirements specified in GB.4208 |
Electrostatic Discharge |
8kV |
EFT |
4kV (power circuit)/2kV (signal circuit) |
surge |
6kV (common mode) 6kV (differential mode) |
Impulse Voltage |
6kV |
power frequency withstand voltage |
2kV |
display |
LED indicator light |
Flash memory |
256Mb |
Remote signaling input |
1 Road |
4G |
Network type: Supports three telecom operators, China Mobile, China Unicom, and China Telecom, with seven communication modes including GPRS, TD-SCDMA, CDMA, CDMA 2000, LTE-FDD, WCDMA, and TD-LTE. |
Antenna impedance: 50 ohm impedance characteristic (SMA interface) | |
Data transmission rate: Baud rates support 9600, 19200, 38400, 57600, 115200bps (default) | |
Support automatic baud rate detection function | |
Support sending AT commands and data through serial port | |
|
Transmission power: GSM/GPRS: Power level 4 (2W): EGSM900 Power level 1 (1W): DCS1800 EDGE: Power level E2 (0.5W): EGSM900 Power level E1 (0.4W): DCS1800 UMTS: Power level 3 (0.25W): WCDMA Power level 3 (0.25W): CDMA2000 Power Level 2 (0.25W): TD-SCDMA LTE: Power Level 3 (0.25W): LTE | |
Data and clock retention time |
>10 years |
Important configuration parameters |
Permanently retained (stored in Flash) |
Overall dimensions |
160mm (length) × 112mm (width) × 71mm (height) |
