Special dust analyzer for electrostatic precipitator

Sintrol ESPY in Finland

Sintrol ESPY is a dust analyzer that is first applied globally and is specifically designed for detecting dust concentration in the import and export of electrostatic precipitators. It uses special software, algorithms, and structures to eliminate the strong electric field interference of electrostatic precipitators and the sudden changes in the charge of charged dust. It can perform reliable and accurate measurements in related fields to optimize the parameters of electrostatic precipitators and save energy and reduce emissions.

Sintrol ESPY dust analyzer features:

More precise parameter adjustment
Linear emission monitoring of dust
high speed microprocessor
Two independent alarm relays
4-20 mA linear output
RS485 communication output
Can be calibrated as quality or density
Industrial grade IP65 casing
Advanced automatic compensation, no drift

Sintrol ESPYSpecial dust analyzer for electrostatic precipitatorAdvantages:

Easy to install, no need for centering;
Can measure very small particles;
Not affected by vibration;
The color of dust does not affect the measurement;
No optical window needs to be kept clean;
Small water droplets will not affect the measurement;
The adhesion on the probe does not affect the measurement;
Intelligent algorithms can filter out interference signals;
Wide measurable range;
Fault information display;
Optional blowback device;
Price economy;
Explosion proof transmitters are optional;
Corrosion resistant sensors are optional;
High temperature and high pressure sensors are optional.

Sintrol ESPY measurement medium:

Solid suspended solids in the airflow
Dust particles: 0.3 μ m or larger
Measurement range: 0.1 mg/m3 to 1 kg/m3
Accuracy: ± 5% of measured values
Static process conditions:
Temperature: 300 ° C (standard)/400-800 ° C (optional)
Pressure: 200 kPa (standard)/zui up to 6MPa (optional)
Smoke flow velocity: 4 m/s minimum
Humidity: 95% RH or less (non condensing)
Input voltage surge: up to 100 V
Damping time: 10 to 180 seconds
Static output signal:
Isolation 4-20 mA (S303/S304/S305)
Relay 5 A, 24 V AC or DC
RS232/485 interface (S304/S305)
Electrostatic environmental conditions:
Temperature: -20 to+45 ° C
Humidity: 95% RH or less (non condensing)
Vibration: 5 m/S2 or less
Electrostatic material:
Probe: 316 stainless steel
Probe insulation: Teflon (high temperature: PEEK or ceramic)
Shell: Die cast aluminum, IP65 protection level
Power supply: 115 VAC/230 VAC, 50/60Hz
Power supply: 3 W
Electrical interface: DIN PG11 power cord; DIN PG11 signal cable.
Weight: 2.3 kg