Application industry

technical data

SIEMENS SITRANS THseriestemperature transmitter

TH100（Pt100Dedicated)It is a low-cost solution for Pt100 measurement that allows for parameter settings.
The very compact structural design makes the SITRANS TH100 transmitter easy to modify measurement points or simulate transmitter use.
This transmitter has explosion-proof options.
Technical data
Connection sensor type: PT100
Connection form: 2, 3 or 4-wire connection
Measurement accuracy: less than 0.25 ℃ when the range is less than 250 ℃ (450 ℉)
When the range is greater than 250 ℃ (450 ℉), it is less than 0.1% of the range
Output signal: 4-20mA, two-wire
Environmental temperature range: -40... 85 ℃
Typical model
SITRANS TH100temperature transmitter
Installed on B-type (DIN 43729) connector, two-wire system 4... 20mA, programmable without electrical isolation
Non explosion proof type、Zone 2 uses "intrinsic safety" explosion-proof type, according to ATEX、Press FM (cFMus)

TH200(Universal type with electrical isolation)
Technical data
Connection sensor type: any type of temperature sensor
Connection form: Depending on the sensor
Measurement accuracy: 0.1% range
Output signal: 4-20mA, two-wire
Environmental temperature range: -40... 85 ℃
Typical model
SITRANS TH200temperature transmitter
Installed on B-type (DIN 43729) connector, two-wire system 4... 20mA, programmable with electrical isolation
Non explosion proof type, "intrinsic safety" explosion-proof type for Zone 2, according to ATEX、Press FM (cFMus)

TH300(Universal type,HARTProtocol with electrical isolation
Technical data
Connection sensor type: any type of temperature sensor
Connection form: Depending on the sensor
Measurement accuracy: less than 0.1% range
Output signal: 4-20mA, two-wire
Environmental temperature range: -40... 85 ℃
Typical model
SITRANS TH300temperature transmitter
Installed on B-type (DIN 43729) connector, two-wire system 4... 20mA, programmable with electrical isolation
Non explosion proof type、Zone 2 uses "intrinsic safety" explosion-proof type, according to ATEX、Press FM (cFMus)

TH400（PAagreement/FFBus protocol)
Technical data
Connection sensor type: any type of temperature sensor
Connection form: Depending on the sensor
Measurement accuracy: see measurement accuracy table
Output
Filter time (programmable) 0... 60 seconds; Update time less than 400ms; ambient temperature range: -40... 85 ℃
Typical model
SITRANS TH400temperature transmitter
Installed on B-type (DIN 43729) connector, two-wire system 4... 20mA, programmable with electrical isolation
PROFIBUS PA bus type
Non explosion proof type、Intrinsically Safe Explosion proof ATEX/FM/CSA、Foundation on-site layout
Non explosion proof, "intrinsic safety" explosion-proof ATEX/FM/CSA