• PI control algorithm, ultra-low noise, low vibration, low heat generation, and smooth operation at low, medium, and high speeds;
• Signal mode: differential/single ended, pulse/directional or dual pulse; Self operation and controlled self operation can be set through the dip switch,
• The self running speed setting is shown in the speedometer;
• Bipolar constant current chopper drive, micro step control, high power loss and low efficiency;
• The maximum power supply voltage can reach DC24~90V;
• Convenient current setting, with 16 selectable levels, and a peak output current of up to 4.5A;
• After being stationary for 1 second, the current is halved
• Built in micro segmentation technology and integrated parameter self-tuning function,
• It can drive 4, 6, and 8-wire two-phase stepper motors, and automatically detect motor parameters when the driver is powered on, thereby optimizing motor current
• Resonance damping algorithm;
• High subdivision: The default factory subdivision of this machine is 128 subdivisions, with 16 levels to choose from. If there are special requirements, please specify the maximum subdivision number required before purchasing
• It has functions such as overvoltage and undervoltage alarm, phase current overcurrent protection, motor phase open circuit detection, etc;
• Pulse, direction, and enable terminals all have constant current input functions, which can be directly connected to input signals without the need for external series resistance to reduce voltage and limit current protection.
• High reliability: using multi-layer boards and surface sealing, leaving sufficient margin for power devices.

1. Electrical specifications

2. Mechanical dimensions