Beijing Jinkun Technology Co., Ltd.:ROF400M RF Fiber Optic Module (This product also has other frequency bands to choose from: ROF001M, ROF030M, ROF060M, ROF120M)
The RF fiber optic transmission module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has a long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method. The RF fiber optic transmission module has different bandwidths8GHz,15GHz,20GHzProducts with different RF bandwidths, and others3GHz, 2.4GHz,1.5GHz
In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.
ROF400MProfit
1. High bandwidth
2. Immune to RF jam
3. Different wavelength is available 1310nm/1490nm/1550nm or WDM
4. Compact size
ROF400MApplication
1. Radar antenna remote
2. For RF signal transmission over long distance
3. Wireless
signal transmission.
4. Microwave
signal distribution
5. EW
Advantages of ROF400M1. High bandwidth
2. Anti electromagnetic interference
3. Optional different wavelengths of light
1310nm/1490nm/1550nm
4. Anti surge power protection, reliable power environment adaptability.
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to * * standards
ROF400M application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. Microwave signal transmission coverage
|
5. Electronic Warfare |
6. Radar signal delay |
Specification: ROF400M |
|
Parameters |
unit |
Typical value |
|
Frequency range |
GHz |
0.01 – 42 |
|
Wavelength |
1550nm+/-10nm |
ITU wavelength available |
|
Gain |
dB |
> -18@2GHz |
|
Input IP3 |
dBm |
26@10GHz |
|
2Input 3dB compressiondBm |
+20 typical |
nd |
|
Harmonic distortion |
dBcType 70. |
113 |
|
SFDR |
dBHz |
2/3 |
|
Max input RF power |
|
dBm |
|
+42dBm |
Noise Figure |
<-145dB/Hz |
|
IM3 Distortion |
dBc |
50 |
<-90Input/output impedance
OhmBeijing Jinkun Technology Co., LtdROF400M RF Fiber Optic ModuleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiver,Fiber optic delay line,High speed optical switch,Uniform light spot environmentand other products,Welcome to inquire!www.jonkon.com.cn,
