English

Beijing Jinkun Technology Co., Ltd
Home>Products>ROF060M RF Fiber Optic Module
ROF060M RF Fiber Optic Module
The RF fiber optic module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signa
Product details


Beijing Jinkun Technology Co., Ltd.:ROF060M:RF fiber optic module

RF fiber optic moduleUsed to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method.RF fiber optic moduleDepending on the bandwidth, there are8GHz,15GHz,20GHzProducts with different RF bandwidths, and others3GHz, 2.4GHz,1.5GHz

In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.

advantage

1. High bandwidth

2. Anti electromagnetic interference3. Optional different wavelengths of light

1310nm/1490nm/1550nm

4. Anti surge power protection, reliable power environment adaptability

5. Adaptive temperature compensation capability, controlling the stable output of the light source.

6. Compact and small volume.

7. Applicable to * * standards

Application scenarios

1. Pull the radar antenna far away

2. Long distance RF signal transmission

3. Radio signal monitoring

4. Microwave signal transmission coverage

5. Electronic Warfare

6. Radar signal delayparameter table:

ROF060M

parameter name

unit

indicator value

frequency range

MHz

2000 – 6000

Link gain

dB0

about

flatness

dB

≤ ± 3.5input1dB

Compression point

dBm

≥ 0

VSWR

NA

≤ 2:1

*Large input RF signal

10

dBm

Noise Figure

<35input/

output impedance

50

Ohm

power supply method

VDC

6~12V

power consumption

W<2

(Single module)

Laser output wavelength

nm1310/1550or

WDM

Laser output power

dBm

>0dBm

Detector operating wavelength

nm

1100~1650

Fiber optic connector type

NAFC/APC

interface

RF connector type

NA

SMA

size

mm85*60*18(Excluding connectors

)Beijing Jinkun Technology Co., Ltd.:ROF060M
RF fiber optic moduleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiverFiber optic delay lineHigh speed optical switchUniform light spot environmentand other products,Welcome to inquire!www.jonkon.com.cnwww.jon-kon.com, Contact phone number


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!