Beijing Jinkun Technology Co., Ltd.:ROF030M:RF fiber optic module
RF fiber optic moduleUsed to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method.RF fiber optic moduleDepending on the bandwidth, there are8GHz, 15GHz, 20GHzProducts with different RF bandwidths, and others3GHz, 2.4GHz,1.5GHz
In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.
The RF over fiber transmission module ROF030M designed
for RF/wireless signal transmission over long distance, which overcome the
problem of high loss when the RF/wireless signal transmit over coaxial cable or
free space.1310nm/1490nm/1550nm
advantage
1. High bandwidth
2. Anti electromagnetic interference
3. Optional different wavelengths of light.
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to * * standards
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission3. Radio signal monitoring4. GPS、 Navigation signal transmission coverage in Beidou or other formats
|
5. Electronic Warfare |
parameter table |
: |
|
ROF030M |
parameter name |
unit |
|
indicator value |
frequency range |
MHz200– 3000 |
|
Link gain |
dB |
about |
|
0dBflatnessdB |
≤ ± 3 |
input |
|
1dB |
Compression point |
dBm |
|
≥ 0 |
VSWR |
10 |
|
NA |
|
≤ 2:1 |
|
*Large input RF signal |
dBm |
Noise Figure |
|
<30phase noisedBc |
< -130@1MHz |
50 |
|
input |
/ |
output impedance |
|
Ohm |
power supply method |
VDC6~12Vpower consumption |
|
W |
<2( |
Single module)Laser operating wavelength |
|
nm |
1310/1550 |
or |
|
WDM |
Laser output power |
dBm |
|
0 |
Detector operating wavelength |
nm |
|
1100~1650 |
Fiber optic connector type |
NA |
|
FC/APC |
|
|
|
RF connector type |
NA |
SMA |
environmental parametersVolume sizemm
85*60*18Beijing Jinkun Technology Co., LtdROF030MRF fiber optic moduleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiver,Fiber optic delay line,High speed optical switch,Uniform light spot environmentand other products,Welcome to inquire!www.jonkon.com.cn

