RFID automatic sorting linehigh frequencyReader/writer HR9916，Output power: 0-10W, adjustable power，Effective distance up to 100cm or more，Typical label processing speed exceeds 80 sheets per secondThe high-frequency reader has been successfully applied toLibrary Management、automatic sorting lineAnimal husbandry managementPersonal identification, conference attendance management, open access control attendance, anti-counterfeiting traceability, and production process control, among othersHigh frequency reader/writerApplication areas.

Application case:

Characteristics of RFID high-frequency automatic sorting line reader/writer

High frequency reader/writerSupporting protocols: ISO/IEC 15693, ISO 18000-3;

Output power: 0-10W, adjustable power;

Secondary development: Provide dynamic link libraries (DLLs) and demo software source code;

Advanced tag collision processing algorithm, high recognition rate, typical tag processing speed exceeding 80 sheets per second;

High frequency reader/writerEquipped with an SMA interface, it can be directly connected to a 50 Ω standard RFID antenna, with an effective distance of over 100cm;

Support scanning working mode ①;

High frequency reader/writerSupport transparent command format operations ②;

Low power design, powered by a single 24V power supply;

① Scanning working mode:High frequency reader/writerAn automatic working mode;

② Transparent command: a high-end feature equipped to complement and support the new features of future tags and the unique features of tags from various manufacturers;

*Effective distance and protocol format are related to external antennas, electronic tags, and working environment.

Interface parameters of RFID high-frequency automatic sorting line reader/writer

DB15 FEMALE for GPIO Interface

1: V+24V DC output positive pole;

2: V -+24V DC output ground;

3: NO relay always starts;

4: NC relay normally closed end;

5: CM relay common terminal;

6: NC reserved;

7: OC universal output port (optocoupler isolated output);

8: OC+universal output port (optocoupler isolated output);

9: NC reserved;

10: NC reserved;

11: OC+universal output terminal (optocoupler isolated output);

12: OC universal output terminal (optocoupler isolated output);

13: IN+universal input port (optocoupler isolated input, can be pulled up internally to+24V);

14: V -+24V DC output ground;

15: IN universal input port (optocoupler isolated input);

High frequency reader/writerDB9 MALE for RS422 Interface：

1: RA+RS422 communication port data receiving end;

2: RA RS422 communication port data receiving end;

3: RB+RS422 communication port data transmitter;

4: RB-RS422 communication port data transmitter;

5: GND ground;

6: NC reserved;

7: NC reserved;

8: NC reserved;

9: NC reserved;

High frequency reader/writerDB9 MALE for RS232 Interface

1: NC reserved;

2: TXD RS232 communication port data transmitter;

3: RXD RS232 communication port data receiving end;

4: NC reserved;

5: GND ground;

6: NC reserved;

7: NC reserved;

8: NC reserved;

9: NC reserved;

Related solutions:

Physical characteristics of RFID high-frequency automatic sorting line reader/writer

Size: 116mmx104mmx27mm;

Weight: 200g;

High frequency reader/writerpackaging accessories

One host;

One serial port cable;

One power supply;

One certificate of conformity;

One packaging box;

otherHigh frequency reader/writerPlease refer to the PDF document below for the parameters

Application case: RFIDHigh frequency reader/writerHR9216 is applied to intelligent catering self-service settlement

Application case: RFIDHigh frequency reader/writerHR9216 applied to intelligent test tube reagent management

RFID high-frequency automatic sorting line reader/writerRelated products:

The RFID high-frequency reader/writer HR7728 is a high-performance protocol electronic tag reader/writer,High frequency reader/writerWidely used in new retail unmanned vending cabinets, drug consignment cabinets, product positioning, test tube reagent management, entertainment industry chip management, fluent shelves, jewelry management, self-service laundry services, production process control, etcHigh frequency reader/writerApplication areas.

RFID high-frequency reader/writer HR9216, supports, one SMA antenna interface,High frequency reader/writerSuccessfully applied in various fields such as library management, self-service book borrowing and returning machines, logistics sorting, management, open access control attendance, anti-counterfeiting, etcHigh frequency reader/writerApplication areas.

The RFID high-frequency intelligent display cabinet shielding antenna HA4232 is a high-performance 50 Ω standard impedance 13.56MHz antennaHigh frequency reader/writerMetal shielded antenna, standard SMA interface supports ISO/IEC 15693 protocol electronic tag high-frequency with a maximum power of 6W, and the sensing distance can reach 55cm.High frequency reader/writerWidely used in catering management (smart disks), self-service book borrowing and returning machines, book sorting lines, production line management, confidential file recognition, jewelry management, new retail, micro libraries, drifting bookcases, license management, intelligent reagent cabinets, laboratory bench reagent management, intelligent display cabinets, counter product display management, voucher and seal card management, medical high-value consumables management, and moreHigh frequency reader/writerSystem.

The RFID ultra-high frequency electronic tag network port reader YXK5IP is a high-performance UHF ultra-high frequency device developed based on the IMPINJ R2000 chip. It supports and combines proprietary efficient signal processing algorithms to achieve fast reading and writing processing of electronic tags while maintaining high recognition rates. It is widely used in various applications such as warehouse entry and exit, weighing management, logistics sorting, intelligent transportation, access control systems, anti-counterfeiting systems, and production process controlHigh frequency reader/writerSystem.

The RFID ultra-high frequency long-distance circularly polarized antenna UA2626 is a high-performance UHF ultra-high frequency antenna. It can be widely used in various wireless radio frequency identification (RFID) systems such as warehouse entry and exit management, logistics sorting, document management, license management, vehicle management, intelligent weighing, distributed libraries, access control attendance, anti-counterfeiting systems, and production process control.

The RFID high-frequency HF book adhesive label HT6507 is a specialized tag for high-frequency book archive management, with a working frequency of 13.56MHz. It adopts a unique tag antenna design and can be read from a long distance. It is widely used in fields such as unmanned retail, management, and equipment inspection.

RFID high-frequency HZHJ is developed for industries that require strict supervision of important items such as reagents, samples, non-metallic products, accessories, material boxes, etc. Using 13.56MHz high-frequency ISO/IEC15693 protocol high-frequency HR7768, accurately locate items to each layer, intelligent shelves do not need to shield signals, and there is no recognition area outside the shelf. Combined with the backend management system, real-time information of items on the shelf can be viewed, and various statistical reports can be customized according to customer requirements. Combining identity recognition technology can determine the information of personnel who receive and place items.

The YXCHTD6960C RFID high-frequency electronic tag anti-theft channel is a high-performance electronic tag channel device that supports fast anti-collision resolution of ISO/IEC15693 format electronic tags. It is equipped with two built-in infrared motion sensors to support personnel entry and exit direction detection and number statistics. It supports EAS and AFI security detection functions, supports single channel independent work and multi-channel parallel work, supports RS232/RS485 serial communication interface and TCP/IP network interface, and can realize remote centralized configuration and management of channel devices. It is an ideal choice for high-frequency application systems such as file access control, commodity anti-theft, open access control attendance, logistics management, etc.