Overview of QBY3 Perfluoroplastic Third Generation Pneumatic Diaphragm Pump

The QBY3 series pneumatic diaphragm pump can pump flowing liquids and dry powders, as well as transport some non flowing media. It has many advantages over self-priming pumps, submersible pumps, shielded pumps, mud pumps, and impurity pumps. Mainly used for transporting corrosive, toxic, and volatile liquids. Pneumatic diaphragm pumps with corresponding materials can be selected according to different conveying materials.

QBY3 Perfluoroplastic Third Generation Pneumatic Diaphragm Pump Product Features

1. No need for irrigation and water diversion, suction up to 5 meters, lift up to 70 meters, outlet pressure ≥ 0.8Mpa

2. Spacious flow and good performance, allowing for the passage of large particles with a diameter of up to 10 millimeters. When pumping mud and impurities, there is minimal wear on the pump;

3. The head and flow rate can be infinitely adjusted through the opening of the air valve (the air pressure can be adjusted between 1-7 bar)

4. The pump has no rotating parts, shaft seals, diaphragms, etc. The medium pumped is completely separated from the moving parts and workpiece medium of the pump, and the conveyed medium will not leak outward. So when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety;

5. No need for electricity, safe and reliable to use in flammable and explosive places

6. Can work submerged in a medium

7. Easy to use, reliable in operation, with simple opening and closing of the gas valve for on-off operation. Even if the pump runs without medium for a long time or suddenly stops due to unexpected situations, it will not be damaged. Once overloaded, the pump will automatically stop, with self-protection performance. When the load returns to normal, it can automatically start and operate again;

8. The pump has a simple structure and few vulnerable parts. It is easy to install and maintain, and the medium transported by the pump does not come into contact with moving parts such as the valve and connecting rod. Unlike other types of pumps, the performance gradually decreases due to wear and tear of components such as rotors, pistons, gears, and blades;

9. Can transport viscous liquids (viscosity below 10000 centipoise);

10. This pump does not require oil lubrication, and even when idling, it has no impact on the pump, which is a major feature of this pump;

QBY3 Perfluoroplastic Third Generation Pneumatic Diaphragm Pump Main Applications

1. Pump paint, gum, and pigment.

2. Adhesive and glue, all types can be pumped up.

3. Pump peanut butter, kimchi, mashed potatoes, red sausage, jam apple puree, chocolate, etc.

4. Various types of tiles, porcelain, bricks, and ceramic glazes.

5. After drilling the oil well, use a pump to suck up sediment and grout.

6. Pump various emulsions and fillers.

7. Pump various types of sewage.

8. Use a pump as an oil tanker and a barge to clear and extract sewage from the warehouse.

9. Hops and fermented powder slurry, syrup, sugar dense.

10. Pump water from mines, tunnels, ore dressing, and slag. Pump cement grout and mortar.

11. Various rubber pastes.

12. Various abrasives, corrosives, petroleum and mud, cleaning oil stains, and general containers.

13. Various highly toxic, flammable, and volatile liquids.

14. Various strong acids, strong alkalis, and highly corrosive liquids.

15. Various high-temperature liquids can withstand up to 150 ℃.

16. As a front-end pressure feeding device for various solid-liquid separation equipment

1. Before installation, carefully check whether there are any hard objects inside the pump body to avoid damaging the impeller and pump body during operation.

2. During installation, pipeline management should not be added to the pump to prevent deformation and affect normal operation.

3. Tighten the anchor bolts to prevent vibration during start-up from affecting the performance of the pump.

4. Install regulating valves on the inlet and outlet pipelines of the pump, and install pressure gauges near the pump outlet to control the pump's operation within rated conditions and ensure its normal use.