Parameters of positive pressure single-sided corrugated machine:

Design speed: 250m/min

◆ Width: 1400mm -2500mm

Main rib roller: ф 405mm (varies depending on rib type) Pressure roller: ф 495mm Preheating roller: ф 420mm

Characteristics of positive pressure single-sided corrugated machine:

The positive pressure single-sided corrugated machine adopts a positive pressure design with low heat loss, allowing the core paper to be evenly compressed and attached to the surface of the corrugated roller, resulting in good corrugated forming. Due to the uniform pressure, the corrugated can be well and evenly coated with glue, ensuring good adhesion of the single-sided corrugated paper.

◆ Roll change, 10 minutes. When changing the corrugated rollers, use a trolley to tow them. Drive the entire set of corrugated rollers into the machine with a hydraulic motor and lock them with a hydraulic system. Fix them on the machine base and easily complete the corrugated roller change with just a few button switches.

The main and auxiliary tile roller bodies are made of alloy steel, which has undergone heat treatment and surface grinding before being sprayed with tungsten carbide.

The corrugated roller, pressure roller, etc. adopt a hydraulic control system with high stability, and also have a buffering effect controlled by air pressure. The gap adjustment between each roller is controlled by electric control.

The adhesive amount control adopts electric adjustment, and the adhesive separation device is electric. The adhesive coating system can operate independently when the host is stopped to prevent the adhesive from drying up.

The mobile gluing system is not only easy to clean, but also beneficial for maintenance, repair and other work.

The simple operation control system, touch screen interface, and color graphic display of operation status, function selection, fault indication, troubleshooting, and parameter settings all demonstrate the excellent functionality, easy operation, and user-friendly nature of this machine.

◆ Built in pre regulator with spray system to adjust the temperature and moisture of core paper.

◆ Synchronous belt wheel drive.

The bearings of the main and auxiliary corrugated rollers and pressure rollers are lubricated with high-temperature grease, which has a long bearing life and smooth operation.