VIP member
Non standard customized rain test chamber
Non standard customized rain test chamber
Product details
For many friends, conventional rain test chambers cannot meet their production testing needs. Therefore, Shenzhen Ruitaier has launched a non-standard customized rain test chamber service. Many customers are satisfied with this move, but some have asked if IPX1/2/3/4/5/6/7/8 rain test levels can be addressed. The editor will provide a detailed introduction:
1. The inner and outer boxes of the rain test chamber are made of SUS304 stainless steel plates, and the circular turntable is made of stainless steel;
2. Left opening, with a large observation window, convenient for customers to observe the samples inside the box;
3. Adjust the pressure with a flow meter, equipped with a water filter and an adjustable water pressure and flow design. Generally, the rainfall is about 10cm/h, which can meet the rainfall of 35mm/m (MIL/STD810E) in the next 20 years. The water distributor can ensure stable control of rainfall and pressure;
4. Separate and independently control R.S, without the need for operators to enter the slot for replacement;
5. Variable frequency motor pump, saving more than 50% electricity;
6. The distance between the nozzle and the test object can be adjusted from 0 (400) to 400 (800) mm;
7. R1, R2, S1, S2 global automatic control system, no need to manually adjust flow and pressure, and can switch instantly.
1. Inner box size (W * H * D) cm80 × 80 × 80, 100 * 100 * 100
2. Spray ring radius 400mm
3. Spray pipe diameter of φ 16mm
4. Spray aperture 0.4mm
5. Aperture spacing of 50mm
6. Swing tube swing amplitude ± 60 °, ± 90 °, ± 160 °
7. The circular turntable with a speed of 1r/min can also be adjusted without a section (optional)
8. Rain exposure time of 15 minutes (adjustable)
9. Rain break time of 30 minutes (adjustable)
10. Rainfall intensity of 150mm/h (adjustable)
11. Observation surface large area visualization tempered glass door
12. Inner and outer box material: stainless steel mirror light plate (SUS304)
13. Protection device for leakage, short circuit, and motor overload protection
14. Power supply 1 Φ 3WAC220V ± 10% 50/6OHZ, 3 Φ 5WAC380V ± 10% 50/6OHZ
The non-standard customized rain test box is mainly suitable for testing products and equipment with special requirements for waterproofing and leakage prevention, such as external lighting and signal devices, as well as protection of automotive lamp housings. It meets the protection test requirements of GB4208 standard IP code second digit characterization numbers 3 and 4, and can also manufacture testing machines that meet other standard testing requirements according to IPX level testing requirements.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-