Xinjiang Machinery Research Institute Co., Ltd
Home>Products>MuShen 4YZJ-5S/6S self-propelled corn harvester with both ear and stem harvesting
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
  • Address
    661 Ronghe South Road, Urumqi Economic and Technological Development Zone, Xinjiang
Contact Now
MuShen 4YZJ-5S/6S self-propelled corn harvester with both ear and stem harvesting
Introduction - Product Introduction: This model is developed by our company based on the absorption of advanced technologies from domestic and foreign
Product details

Product Introduction:

This model is the result of our company's absorption of advanced technologies from domestic and foreign corn harvesters and green feed harvesters, combined with years of deep cultivation in the domestic corn mechanized harvesting market, and independently developed large and medium-sized ear and stem harvesting corn harvesting machinery with ingenuity. This model has innovative design, simple structure, convenient maintenance, complete performance, high operational efficiency, and good operational quality. All performance indicators meet or exceed the requirements of relevant national standards. Its comprehensive technical indicators rank among similar domestic models Level.


Product features:

1. Harvest the ears and stems on the cutting table:

The cutting table adopts a double-layer cutting table design:

Upper layer ear picking and cutting table row spacing500mmSuitable for operations in most regions; Adopting a mature stem pulling roller and ear picking plate structure, the operation efficiency is high, the grain loss is minimal, and the elongated dividing point has stronger adaptability in different areas.

The lower stem harvesting platform uses a roller cutter to cut and collect the stems, and a telescopic scraper type agitator is used to aggregate the corn stems. After the corn stems enter the ear picking channel, the roots of the stems are cut off while the stems are pulled down by the stem pulling roller and forcibly transported to the pre pressure feeding inlet by the telescopic scraper type agitator.

2. Pre pressure feeding into the shredding device:

Design of separate preloading feeding device and shredding device; Adopting a detachable four roller floating pre pressing feeding structure, it meets the efficient feeding of a large amount of materials, and is easy to disassemble with low maintenance strength. The shredding knife roller is used The advanced silage machine has a blade roller structure and multiple rows of densely arranged chopping blades, ensuring consistent and uniform stem chopping length. The cutting blades are made of high-quality alloy steel, which has good wear resistance and a long service life.

3. Secondary throwing device:

The secondary throwing device has a reasonable structure, high speed, reasonable throwing arc design, long material throwing distance, high efficiency, and can meet the requirements of long-distance following and loading operations.

4. Ear elevator:

The width of the elevator is large, making the transportation of corn ears smoother and reducing collision losses; The outlet of the elevator is equipped with floating grass rollers and a side mounted cleaning fan unique to Mu Shen, which reduces the amount of impurities and minimizes equipment failures.

5. Efficient flat peeling machine:

This model is equipped with our company's high-quality and efficient flat five group peeling machine, which can be optionally equipped with full rubber and full iron or semi rubber and half iron to meet the needs of different varieties, with good reliability and high peeling rate.

6. Increase the size of the high unloading ear box:

The configuration involves first lifting and then flipping the large capacity grain box, resulting in high operational efficiency.

7. Whole machine transmission system:

The transmission structure of the whole machine is reasonable, simple, and reliable, all using Mingyoulian group toothed belts. The core components of the whole machine are all imported maintenance free bearings, with high transmission efficiency, low noise, and easy maintenance.

8. Walking system:

This model is equipped with an imported static hydraulic drive system, which has strong driving force, smooth operation, and high reliability. It can achieve the experience of zero to maximum speed with one lever operation. This model is equipped with a high-quality domestic manufacturer's drive axle transmission system, which has high reliability and good adaptability.

9. Brand new driver's cabin:

This model is equipped with a newly designed enlarged and widened cab, which has a beautiful appearance, comfortable driving experience, and a wide field of vision. It also comes with positive pressure air conditioning and floating seats, providing comfortable driving experience.

10. Engine:

Equipped with Yuchai330High quality six cylinder engine with abundant power and higher fuel economy, equipped with520The rolling plastic fuel tank greatly improves operational efficiency.

11. Electrical system:

The throwing drum is equipped with a remote control device, which can follow the vehicle to remotely control the turning of the throwing drum; The display screen can be split to show the full status of the ear box, the grass outlet status of the feeding tube, and the status of the rear view area.

12. Inheriting the excellent tradition of Xinjiang Mushen corn machine, the whole machine has high reliability and good operation effect.


Product parameters:

Serial number

term eye

unit

Design value

1

Model name

/

4YZJ-6SSelf propelled corn harvester with both ear and stem harvesting

2

structural style

/

Wheeled, ear picking, peeling, straw recycling

3

Supporting engine model specifications

/

YCK09330-T400

4

Supporting engine manufacturing enterprises

/

Guangxi Yuchai Machinery Co., Ltd

5

Rated power of supporting engine

kW

243

6

Rated speed of supporting engine

r/min

2200

7

outline dimensionlong×wide×tall

mm

8830×3410×3850

8

Overall quality

kg

10900

9

Number of working lines (number of channels)

go

6

10

line spacing

mm

500

11

Working width

mm

3220

12

Small ground clearance

mm

400

13

operating speed

km/h

16

14

Layout position of fruit ear elevator

/

Right position

15

Type of ear picking mechanism

/

Pulling stem roller+Harvest board

16

Cutting blade type

/

rolling cutter

17

Unloading method

/

Hydraulic tilting type

18

Type of straw shredding and recycling mechanism

/

rolling cutter+auger+Chop and throw

19

Location of straw shredding and recycling mechanism

/

front

20

Working width of straw chopping and recycling mechanism

mm

2870

21

Driving Type

/

Four-wheel drive

22

Drive modefront/after

/

Front: Hydraulic Drive Afterwards: Mechanical Drive

23

wheelbase

mm

3460

24

Guiding wheel track

mm

2030

25

Drive wheel track

mm

2040

26

Specification of guide wheel tire

/

15L-24/13.6-24

27

Drive wheel tire specifications

/

23.1-26


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!