UKW-500 microcomputer controlled constant temperature sintering resistorMain specifications and technical parameters:

1: The loading platform can support a weight of 500kg and is movable.

2: The furnace door mechanism adopts an electric lifting mechanism.

3: Polycrystalline fiber mullite with a temperature resistance of 1400 ℃ is used as the lining material.

4: The electric heating element adopts Nicr nickel chromium nickel silicon, with a temperature resistance of up to 1200 ℃. The diameter of the heating wire is Φ 3,

Adopting three-phase regulation temperature control, power adjustable, maximum power: 120KW. Heating temperature: room temperature~500 ℃

5: Effective size of furnace chamber: 800 × 600 × 600; 1000×1000×1000； 1000×1500×1500（mm）

6: The furnace bottom plate is made of SiC material, which can withstand temperatures up to 1400 ℃ without deformation, and has a load capacity of 500kg.

7: The rotating shaft of the furnace bottom tray is made of heat-resistant stainless steel with a SiC material disc on top. Driven by the bottom motor, the shaft wheel

Running at a constant speed of 1-5 revolutions per minute, the SiC pressure bearing capacity can reach 500kg, which means the weight of the workpiece can reach 500kg.

8: There are 2 thermocouples installed in the furnace, divided into upper and lower layers, which are independently controlled by two programmable controllers.

9: There are thermal circulation channels inside the furnace, distributed according to the heat flux layer, and there are four holes with a diameter of 60 on the top for ventilation.

10: The drum frame of the furnace shell is made of channel steel, and the structural components are welded. The outer layer of the shell is made of A₃Cold pressing process for producing surface paint on boards.

11: The control electrical appliances adopt intelligent (50 stage) program-controlled heating, with dual zone temperature control, using 800-1000A/1200V,

Bidirectional thyristor voltage regulation

12. The electric door lifting structure is implemented by an electrical control cabinet and can be manually, automatically, and lifted to open.