MF-550 Fine Grinding Mill

(1) The new grinding disc design has high output, strong wear resistance, and a lifespan twice that of ordinary grinding discs.
(2) By using newly designed specialized bearings, high speeds are achieved, while only one drive motor is used to ensure efficient impact grinding, which greatly saves mechanical operation time and engineering control.
(3) Easy to install and maintain, simply open the door cover to clean.
(4) The grinding process is fully sealed with no dust leakage.
(5) Fully automated, automatic feeding, discharging, and sorting.
(6) Grinding gap adjustment is simple, just use a feeler gauge and adjustment bolt to accurately adjust.
(7) The host cooling system adopts a combination of air and water cooling.

Advantages:

• The main advantage of this machine is its low temperature. According to thermal work equivalent: converted into 860 kcal of heat per hour of work. This machine is equipped with external ventilation. The air volume reaches 2602m3/h, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small amount of heat is solved by water cooling. The inlet temperature of cold water should not exceed 25 ℃, and the outlet water temperature should not exceed 45 ℃. In summer, the cooling water flow should be increased appropriately to reduce the temperature.
• The design is reasonable, with a small cross-sectional area of the grinding chamber and a grinding disc that is almost flat and upright. As soon as the material enters, it is immediately captured, ground, and quickly removed, which eliminates the surge of material in the grinding chamber, avoids the material from heating up and decomposing, and thus has a higher yield.