Machine tool usage and performance characteristics

·M1380B cylindrical grinder is used for grinding cylindrical parts with an outer diameter of Φ 100-800mm and a length of 5000mm. Not only can cylindrical parts be processed, but also the small end face of the shaft shoulder can be ground by using a small axial feed of the grinding wheel spindle. The worktable can rotate a large angle of 2 ° 30 ', so it can also grind the outer cone surface.
·In addition to hydraulic fast feed, there are also electric fast and electric slow feed suitable for adjusting machine tools, as well as point-to-point and automatic feed for grinding wheels.
·The feed rail and grinding wheel spindle bearings are both equipped with static pressure technology, and are equipped with independent spindle oil tanks and rail hydraulic stations.
·The workbench guide rail is a wide earth static pressure guide rail, with no crawling phenomenon at low speeds and easy travel adjustment.
·The rotation of the workpiece and the reciprocating motion of the worktable are both driven by DC motors controlled by thyristors, which can achieve stepless speed regulation.
·The bed body is made of high-strength and low stress alloy cast iron cast as a whole, without splicing, and the guide rail has good linearity.