VIP member
Lithium phosphate microwave drying equipment
The drying oven of the microwave lithium phosphate drying equipment is made entirely of 1.5mm thick 304 stainless steel plate, which is corrosion-resi
Product details
Microwave lithium phosphate drying equipmentThe drying oven is entirely made of 1.5mm thick 304 stainless steel plate, which is corrosion-resistant. The frame is designed and manufactured with 2mm thick 304 stainless steel plate without a skeleton. There is a cleaning door on the front side of the cavity, and it has an automatic power-off protection device for opening the door. There are two rows of intake and drainage holes at the bottom of the box. This device consists of multiple heating and drying chambers. High drying efficiency.
Lithium phosphateMicrowave drying equipmentThe box is precisely calculated using a new technology of multi-source and multi port broadband microwave matrix combination feeding. The microwave is fed from the top, and the microwave is fed from top to bottom in a broadband manner, which makes the material heating more uniform. The reliable electronic circuit design ensures that the output power of the microwave device is adjustable to match the high-efficiency operation of the magnetron.
Lithium phosphate microwave drying equipmentTechnical Specifications:
1) Power supply: three-phase five wire 380V
2) Microwave frequency: 2450 ± 50MHz
3) Microwave power: 80KW (adjustable)
4) Dehydration rate: 80 kg/hour
5) Drying temperature: 80-120 degrees (adjustable and controllable)
6) Height of inlet and outlet: 50mm
7) Belt width: 900mm
8) Transmission speed: 0-5 m/min (variable frequency speed regulation)
9) Dimensions (length x width x height): approximately 13970 x 1510 x 1750mm
10) Execution standard: Complies with the domestic GB5226 electrical standard
Due to the non-standard nature of the lithium phosphate microwave drying equipment, the above parameters are for reference only. Please contact us for more information.
Lithium phosphateMicrowave drying equipmentThe box is precisely calculated using a new technology of multi-source and multi port broadband microwave matrix combination feeding. The microwave is fed from the top, and the microwave is fed from top to bottom in a broadband manner, which makes the material heating more uniform. The reliable electronic circuit design ensures that the output power of the microwave device is adjustable to match the high-efficiency operation of the magnetron.
Lithium phosphate microwave drying equipmentTechnical Specifications:
1) Power supply: three-phase five wire 380V
2) Microwave frequency: 2450 ± 50MHz
3) Microwave power: 80KW (adjustable)
4) Dehydration rate: 80 kg/hour
5) Drying temperature: 80-120 degrees (adjustable and controllable)
6) Height of inlet and outlet: 50mm
7) Belt width: 900mm
8) Transmission speed: 0-5 m/min (variable frequency speed regulation)
9) Dimensions (length x width x height): approximately 13970 x 1510 x 1750mm
10) Execution standard: Complies with the domestic GB5226 electrical standard
Due to the non-standard nature of the lithium phosphate microwave drying equipment, the above parameters are for reference only. Please contact us for more information.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-