VIP member
KTF slider displacement sensor
Linear displacement sensor with a working range of up to 2500mm (other strokes can be customized)
Product details
Characteristics of KTF slider displacement sensor:
● Rod free design
Long service life, with a running frequency of up to 50 × 106 times
Excellent linearity, up to ± 0.04%
Resolution higher than 0.01mm
● High operating speed
DIN 43 650 standard plug and socket
The ball joint structure can avoid lateral loads
When installed face down, the protection level is IP54
The KTF slider displacement sensor is mainly used for direct and accurate measurement of displacement and length in control, adjustment, and measurement systems. The non pull rod design allows the sensor to slide on the side of the sensor and move along the length direction of the sensor, thus avoiding the common sensor failure problem caused by the "pump" effect in general sensors, and the stroke can reach 3000 millimeters.
The novel ball joint releases the torque generated by unevenness or tilt, and the sensor can withstand even tension. The installation fixture can be fine tuned. Based on the relationship between materials and processes. The temperature coefficient of the sensor is extremely low. The sturdy structure and materials enable the sensor to operate reliably under harsh temperature and vibration conditions. The measurement principle of the sensor is simple, with passive and absolute output that makes it unaffected by external electromagnetic effects. At the same time, it does not require a built-in power supply and can maintain real-time displacement data in the event of a power outage.
|
Electrical parameters |
||||||
|
workload range |
75~125mm |
150~175mm |
200~500mm |
550~1150mm |
1250~3000mm |
|
|
Independent linearity (±%) |
0.1 |
0.07 |
0.05 |
0.05 |
0.04 |
|
|
Resistance tolerance ± 10% |
5.0 KΩ |
10 KΩ |
20 KΩ |
|||
|
Electrical travel |
Range+3mm |
|||||
|
repeatability accuracy |
0.01mm |
|||||
|
resolution |
Infinite Unbreakable Analysis |
|||||
|
Electric brush working current |
<1μA |
|||||
|
Maximum current of electric brush during malfunction |
10μA |
|||||
|
Maximum allowable supply voltage |
42V |
|||||
|
Effective temperature coefficient ratio of voltage |
5 (typical value) |
10ppm/k |
||||
|
insulation resistance |
>10MΩ |
|||||
|
insulation strength |
<100μA |
|||||
|
mechanical parameters |
||||||
|
The maximum tensile force that the pull rod can withstand |
50KG |
|||||
|
Work stress |
Horizontal direction<10N, vertical direction<10N |
|||||
|
environmental parameters |
||||||
|
Anti vibration standard |
5.Hz. ..2000Hz |
|||||
|
Impact resistance standard |
50g，11ms |
|||||
|
service life |
>50X106time |
|||||
|
Maximum operating speed |
10m/s max |
|||||
|
Operating acceleration |
200(20g)m/s2max |
|||||
|
protection level |
IP54(DIN400 50 / IEC 529) |
|||||
Tags:  Displacement Sensor
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-