JZX906 NB-IOT module-Global supplier

3rd Floor, Building B, Shangri La Creative Park, Pingshan 1st Road, Taoyuan Street, Nanshan District, Shenzhen

JZX906 embedded NB-IOT low-power three meter module is a communication module of Internet of Things developed based on the Narrow Band Internet of Things (NB IoT). The module is built on a cellular network. It is an emerging technology in the IoT field that supports cellular data connections of low-power devices over wide area networks, also known as Low Power Wide Area Networks (LPWAN). NB IoT supports efficient connection of devices with long standby time and high network connectivity requirements. It can provide comprehensive indoor cellular data connection coverage, with advantages such as low power consumption, wide coverage, low cost, and large capacity.

Product Features
Low power consumption, with a current of less than 3uA during sleep mode; powered by batteries of ER26500 or ER34615, communicating once every 2 weeks, theoretically capable of over 10 years
● Supports chip SIM cards without the need for a SIM card holder, avoiding poor contact or oxidation that may affect SIM card reading and writing
Low voltage operation: When the voltage of the lithium battery drops to 2.8V (the battery is usually dead at 2.6V), the module can still work normally
● Independently developed, embedded 32-bit ARMV7 MCU with real-time operating system
The working frequency adopts 800/900MHz
The module works in UDP mode to save power and has a timed automatic wake-up function. The wake-up cycle can be customized by the user
The module supports photoelectric direct reading of table types, 188 protocol, 645 protocol, pulse type table, and supports remote valve opening and closing
Embedded watchdog, wide power management, no crashes, automatic recovery from disconnections, flexible and convenient
Anti interference design, even in the event of hardware deadlock and ordinary watchdog unable to serve the processor and communication module, it can still reliably and automatically restore to normal state
● Standard Industrial TTL
● Support shell sensing to send data, convenient for debugging and parameter calibration.
● Provide user settings software and open interfaces
Industrial embedded design, easy installation, working temperature: -40 ° C~+85 ° C, communication is not affected at -35 ° C
Multiple baud rates can be set
The module can be triggered by a reed switch to start reporting data
The module reporting interval can be set to a maximum of 45 days and a minimum of 5 minutes