JX2010 Metallographic Image Analysis Software SystemIt contains 150 categories and approximately 700 commonly used sub modules, basically covering commonly used metallographic standards and meeting the requirements of metallographic analysis and inspection for the vast majority of units. Specify open related categories according to the needs of different industries to meet industry testing requirements. Given the continuous increase in new materials and imported grade materials, materials and evaluation standards that have not yet been entered into the software can be customized and entered.

New metallographic software standard: Partial selection

GB/T 6394-2017 Grain Size Measurement Rating (Grain Boundary Extraction, Grain Boundary Reconstruction, Single phase, Dual phase, Grain Size Measurement, Rating)

GB/T 10561-2005/ISO 4967:1998 Determination of Non metallic Inclusion Content in Steel

GB/T 7216-2009 Grey Cast Iron: Graphite Distribution Shape, Graphite Length, Pearlite Quantity, Carbide Quantity, etc

GB/T 9441-2009 Ductile Iron: Spheroidization Rate, Graphite Size, Pearlite Quantity, Carbide Quantity, etc

GB/T 26656-2011 Creep graphite cast iron: graphite morphology, creep rate, pearlite quantity, phosphorus eutectic quantity, carbide quantity, etc

GB/T 18254-2016 Metallographic examination of high carbon chromium bearing steel

GB/T 13925-2010 Cast high manganese steel: grades of undissolved carbides, grades of precipitated carbides, grades of overheated carbides

JB/T 1255-2014 Rolling Bearings - Heat Treatment Technical Conditions for High Carbon Chromium Bearing Steel Parts

QC/T 262-1999 Metallographic examination of automotive carburized gears: Martensitic needle length, carbide, austenite rating, austenite content

QC/T 502-1999 Metallographic examination of automotive induction hardening parts

QC/T 553-2008 Casting Aluminum Pistons for Automotive Engines

Metallographic examination

DL/T 773-2016 Steel Ball Grading Standard for 12Cr1MoV in Thermal Power Plants - Characteristics of Ferrite and Pearlite Spheroidization Structure

DL/T 773-2016 Steel Ball Grading Standard for 12Cr1MoV Used in Thermal Power Plants - Characteristics of Ferrite with Bainite or Bainite Spheroidization Structure

DL/T 1422-2015 18Cr-8Ni series austenitic stainless steel boiler tube microstructure aging rating standard

ISO 4499-2016 Hard alloys - Metallographic determination of microstructure

ASTM A262-2015 Testing Procedure for Susceptibility to intergranular Corrosion of Austenitic Stainless Steel

ASTM E45-2013 Method for Evaluating Inclusion Content in Steel

The national standard library contains 150 categories and approximately 700 commonly used sub modules, which basically cover commonly used metallographic standards and meet the requirements of metallographic analysis and inspection for the vast majority of units

Basic functions:

1. Organizational analysis

Correctly select the execution standards for materials, capture and take pictures of the metallographic structure of the sample through the camera system of the metallographic microscope, and enter the evaluation level interface

2. Image measurement

The software provides various measurement tools such as distance, rectangle, and point to center measurement to meet users' basic geometric measurement functions and obtain relevant measurement data.

3. National standard image library

The software provides the function of viewing image libraries and offers users the latest national standard level image libraries.

4. Fixed magnification printing

The software provides a fixed magnification printing function, allowing users to achieve fixed magnification printing of images according to their actual printing magnification requirements.