VIP member
Product details
WH-MTThe input type densitometer is a high-precision densitometer developed based on the vibration principle and combined with actual operating conditions by introducing Canadian technology.
The input density meter can be widely used in closed or open tanks, troughs, diversion channels, and open channels. The product is also widely used in sediment content detection at hydrological stations.
Product Features
Immersive design, easy to use
Continuous online monitoring
temperature compensation
Integrated design, maintenance free
IP68 waterproof design, suitable for deep water measurement
Explosion proof design, convenient for use in special industries
performance parameter
| measuring range | 0 – 3 g /cc (0 – 3000 kg/m3) |
| calibration range | 0.6 – 1.25 g /cc (600 – 1250 kg/m3) |
| measurement accuracy | ± 0.001 g /cc (± 1 kg/m3) |
| repeatability | ± 0.0001 g /cc (± 0.1 kg/m3) |
| Operating temperature range | -50℃ ~ +200℃ |
| Maximum working pressure | 20Mpa |
| Fluid viscosity range | 0 – 20000 cP |
| temperature coefficient | 0.1 kg/m3/℃ (After correction) |
| pressure influence | Negligible |
| Built in temperature sensor | PT100 |
| Liquid receiving material | Stainless steel, Hastelloy alloyC22Manganese alloy400,Titanium alloy, etc |
| Fork body coating | Standard type,PTFEOr electrolytic polishing |
| power supply | 20 – 28 VDC，35 – 45 mA |
| Analog signal output | 4 – 20 mAIsolation type, non self powered type |
| output accuracy(20℃) | Reading of± 0.1%perhaps± 0.05% FS |
| Output repeatability(-40 ~ +85℃) | ± 0.05% FS |
| protection grade | IP65 |
| casing | aluminum alloy |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-