The high-temperature heating table at 800 degrees Celsius is a controlled heating device with stable temperature. This platform uses high-efficiency thermal analysis heating tubes combined with high-quality high-temperature stainless steel or high conductivity ceramic heating plates, ensuring uniform heat transfer, high conductivity, and energy saving; The temperature is intelligently controlled by PID, with accurate, intuitive, and aesthetically pleasing temperature control. Mainly suitable for research fields such as semiconductors, display screens, nanotechnology, physics, materials, etc., it is easy to operate, fast, and has high work efficiency, making it a good helper for your production and processing. Support customization of high-temperature heating stations

Non standard design customization

High temperature heating table is a device that controls the ambient temperature and is widely used in laboratories, production lines, scientific research and other fields Multiple models with different temperature ranges of 600 degrees, 700 degrees, 800 degrees, high-temperature vacuum heating table, high cost-effectiveness Full technical support throughout the process, supporting non-standard design customization

1、 Advantages of ETO OL High Temperature Platform Products:

1. Adopting the original Yudian PID artificial intelligence digital temperature controller, it has high accuracy, simple and easy operation, and is safe, clear and convenient;

2. Using high-quality solid-state (SSR) relays, the lifespan is 100 times that of ordinary contact relays;

3. Using multiple high-efficiency thermal analysis heating tubes, maintenance is convenient and fast, with a low failure rate;

4. The entire panel is made of high-quality high-temperature stainless steel or high conductivity ceramic heating plates, with high thermal conductivity heating blocks, uniform heating, high temperature oxidation resistance, and small thermal expansion;

5. The shell of the furnace body is made entirely of imported SUS304 stainless steel material, and there are no drawbacks such as paint peeling or rusting when used in non special environments;

2、 Technical parameters of heating table

1. Model: ET-1010-700

2. Overall dimensions: length 200mm X width 200mm X height 230mm

3. Effective constant temperature range of heating plate: 100mm x 100mm

4. Temperature resolution: 0.1 ℃

5. Temperature control range: room temperature -700 ℃

6. Temperature control accuracy: ± 1% ℃

7. Temperature control accuracy: ± 1% ℃

8. Weight: 8kg

9. Inner height of cover: 30mm

10. Power input: AC220V 8A

11. Heating power: 1400W

12. Temperature control method: 30 program segments for temperature control

13. Temperature control range: from room temperature to 700 ℃, it can rise to 700 ℃ within 20 minutes

14. Heating panel material: special high-temperature stainless steel

15. Other optional specifications for high-temperature heating stations

Model: ET-2020-700 Power Supply: AC220V 50HZ Total Power: 800W Temperature Control Range: Room Temperature -700 ° C Heating Plate Size: 200 * 200mm Dimensions: 350 * 300 * 250mm Weight: 20KG

Model: ET-3020-700G Power Supply: AC220V 50HZ Total Power: 1200W Temperature Control Range: Room Temperature -700 ° C Heating Plate Size: 300 * 200mm Dimensions: 450 * 400 * 250mm Weight: 30KG

Model: ET-4030-700 Power Supply: AC220V 50HZ Total Power: 1800W Temperature Control Range: Room Temperature -700 ° C Heating Plate Size: 400 * 300mm Dimensions: 500 * 500 * 250mm Weight: 40KG

3、 Installation and commissioning of high-temperature heating platform

1. Open the packaging and carefully read this manual and check the attachments (see attachment list)

2. Remove and place the host horizontally

3. After confirming that the grounding wire of this machine is well grounded, it can be powered on for testing;

4、 Heating table temperature setting

1. Press the SET button, and the SV window display unit will flash to enter the setting state;

2. Use the three arrow keys to set the desired temperature (press the shift key to switch between single digit, ten digit, and several hundred digit numbers);

3. After the setting is completed, press the SET button again. At this time, the window will return to its original display and the instrument will enter the working state after the data is stored;

Instrument self-tuning function

When starting self-tuning, the heating system must be in working condition and the measured temperature must be lower than the set temperature:

2. Press and hold the ∨ decrease value button for 5 seconds, then release it. At this time, the self-tuning indicator light AT will light up and the instrument will enter the self-tuning state;

After the self-tuning is completed, the AT light will turn off, and the instrument will automatically calculate a set of parameters suitable for the heating system and store them automatically;

(Note: During the self-tuning period of the instrument, it is not allowed to power off or manually exit, otherwise the self-tuning will be invalid. The parameters of the instrument have been set before leaving the factory; there is no need to do self-tuning again when the parameters are stable.)

5、 Machine precautions

During the operation of the machine, the temperature of the casing is high and must not be touched by hand;

2. Do not drip any liquid onto the heating plate, otherwise it may cause liquid splashing and injury at high temperatures;

3. This machine should not be used in harsh environments such as humidity, flammability, corrosiveness, and high dust;

4. Non professionals are not allowed to guess and repair the machine themselves, otherwise our company will not be responsible for any responsibility;

Heating equipment accessories

1. One fuse

2. One copy of the instruction manual

3. One certificate of conformity

The warranty period for this machine is twelve months from the date of purchase. If there is no human error during the warranty period, we will provide free repairs. If there is a human error or the warranty period has expired, we will provide service and lifelong maintenance.

ETOOL, a professional manufacturer of constant temperature heating tables, has been focusing on the production of high-temperature heating tables for 15 years We provide heating platforms, constant temperature heating platforms, constant temperature heating platforms, and laboratory heating platforms for production, with temperature ranges of 600 degrees, 700 degrees, and 800 degrees. We independently develop and produce heating plates with a surface uniformity of 1-2% ℃ Main applications of the product: semiconductor LED/LCD、 High tech industries and applications such as solar energy, electronics, and communication. Welcome to inquire by phone