1. Accuracy level: Level 0.5

2. Sensor: 0.2/0.3 level high-precision force sensor, with excellent linearity, good repeatability, and high acquisition frequency.

3. Capacity selection: Choose one of 10, 20, 50, 100, 200, 500, 1000, or 2000N

4. Test force testing range: 0.2% to 100% FS

5. Power accuracy: within ± 0.2%

6. Power decomposition degree: 1/2000000

7. Power amplification factor: Full automatic gear shift switching: X1, X2, X5, X10, X20, X50, X100, a total of seven sections

8. Displacement resolution: 0.0005mm

9. Control system: servo controller

10. Power source: AC brushless servo motor

11. Transmission screw: Adopting double structure precision gapless rolling ball screw

12. Test speed range: 0.005-500mm/min (fully computer-controlled)

13. Test travel (excluding fixtures): 1000mm

14. Operating system: Material testing machine software independently developed by HY-V based on XP platform

15. Data processing system: a set of Lenovo branded computers,

16. Data transmission: RS-232 data transmission, all parameters are saved on the peripheral hardware, and the computer does not need to install any external hardware, greatly facilitating users to replace, upgrade, and maintain the computer themselves.

17. Large deformation measuring device: Precision displacement sensor 1000R/P, accuracy: 0.001mm, aluminum alloy bracket and fixture, beautiful and sturdy. When testing is not required, the side can be rotated and moved without occupying testing space.

18. Dust prevention device: using a folding dust cover to protect the ball screw from dust entering, the lifespan and accuracy of the ball screw

19. Multiple protection devices:

①. Mechanical switch protection for upper and lower limit travel ② Emergency stop switch brake protection in case of emergency ③ Software overload limit protection

④. Breakpoint shutdown protection

20. Host volume: 540x480x1350mm, excluding computer desk size

21. Power supply: AC220V 50Hz

22. Weight: Approximately 80kg

23. Fixture: 1 set of test fixtures

3、 Functional features:

1. Software environment: HY-V software package on the Windows XP platform in both Chinese and English.

2. Language selection: It has multiple language interfaces such as Simplified Chinese, Traditional Chinese, and English that can be freely switched during operation, greatly facilitating the use of the operator.

3. Unit conversion: Commonly used forces such as gf, kgf, N, KN, Ibf, as well as displacements such as mm, cm, m, in, etc., have and can be freely converted.

4. Standard functions: ① Falling point ②. 0.2% off set ③ Qufu strength ④ Tensile strength ⑤ Elongation rate ⑥ Shear strength ⑦. maximum value ⑧ Fracture value ⑨ Deformation amount (optional) ⑩ Average value ⑾ Compare the parameters of 20 models, including graphics, etc

5. Multiple curve display modes: stress-strain, force displacement, force time, strength time, and other curve modes.

6. Utilize data: Use database management to test and standardize, allowing authors to use pre built data or build their own.

7. Test mode: including tensile testing Bending resistance Stress resistance Anti bending Adhesive Tearing be stripped. ... waiting for the setting.

8. Control mode: Positioning movement Fixed speed Fixed load, etc.

9. Convenient and practical zeroing function: force, extension, and displacement can be manually zeroed by pressing one key, and the system also has the function of automatically zeroing at the beginning of the test

10. Dynamic display: During the testing process, the load, elongation, displacement, and selected test curve are dynamically displayed in real-time on the main control screen as the test progresses.

11. Peak holding: Throughout the entire testing process, the maximum value of the test item is always displayed on the screen window following the progress of the experiment.

12. Manual point picking function: It has a special manual point picking function during the testing process.

13. Automatic discrimination: After the sample is damaged, the system automatically recognizes and switches to the next function according to the expected testing requirements.

14. Automatic storage: Test conditions, test results, and gauge positions are automatically stored.

15. Automatic regression: It has the function of automatically returning the intermediate board to the starting point of the test after the test is completed.

16. Graphic analysis: After the experiment is completed, the data can be viewed with a mouse on the test curve. Any point on the test curve can be zoomed in locally for analysis, and printing can be selected.

17. Curve comparison: The curves of the same group of samples can be superimposed for comparison.

18. Report output: Graphics and parameters are open for customers to modify as needed It can be output to WORD report format, which is convenient, easy to learn, practical, and widely circulated in different locations.

19. Range extension function: It can be equipped with sensors and fixtures of different capacity specifications to expand the measurement range and achieve higher test accuracy

20. Automatic fault detection: When the servo system malfunctions, it can automatically diagnose the cause of the fault and store the code of the fault in the servo drive for quick troubleshooting.