Glass mercury electric contact thermometer, adjustable thermometer, conductivity meter for incubatorSpecially provided by Shanghai Shupei Experimental Equipment Co., Ltd., the product specifications are complete and the quantity is preferred. Customers are welcome to choose.

Glass mercury electric contact thermometer, adjustable thermometer, conductivity meter for incubatorProduct Introduction:

Electric contact thermometers can be divided into fixed and adjustable types. They are each divided into two series: the G series electric contact glass mercury thermometer and the G series rod type electric contact thermometer.

Product Technical Parameters:
1： G series rod type electric contact thermometer: G-01F is a straight rod type fixed electric contact thermometer, and G-02F has a 90 ° angle. Angle bar fixed electric contact thermometer, without ruler, but temperature values are marked at certain contact positions, contact: mercury platinum. Zui large workflow: 20mA (no inductive load), Zui high voltage: 36V. Temperature sensing liquid: mercury.

2： G series electric contact glass mercury thermometer: Adjustable electric contact thermometer adjusts the contact position of the thermometer by rotating the magnetic steel adjustment cap on the top of the thermometer. Fixed type is a type of contact that is fixed at a specific temperature and cannot be adjusted. The number of electrical contacts usually does not exceed 3, and the distance between adjacent points is not less than 7mm. (Contact temperature is determined by the user) Contact: mercury platinum. Contact maximum current: 20mA (non inductive load). Zui high voltage: 36V. Temperature sensing liquid: mercury.

3： The G series electric contact metal protective cover glass mercury thermometer is equipped with a metal protective cover outside the original G series electric contact glass mercury thermometer. The metal protective sleeve can be made of three materials according to user needs: nickel chromium (A3 steel), brass (HPb59-1 or H62), and stainless steel (1Cr18Ni9Ti) sleeve. The threaded connection is generally made into metric M27 × 2 and M20 × 1.5 or imperial G3/4 ', G1/2' and G3/8 ',

Product Other Specification Introduction Table: