Details of DS-ZF1 evaporation sensor:

Technical Parameter

·Measurement range: 0-240mm
·Resolution: 0.1mm
·Measurement accuracy: ± 0.3mm
·Power supply mode: DC12V, DC24V optional
·Output form: 1. Current 4-20mA; 2. Voltage: 0-5VDC; 3. RS232/RS485 network communication.
·Static power consumption: approximately 5mA
·Output load:<200 Ω (typical value 100 Ω, customized for>200 Ω)
·Specification size: 215 * 350 * 400mm (inner barrel diameter * outer barrel diameter * total height)
·Environmental temperature: - 30℃～70℃
·Storage environment: -40 ℃ to 80 ℃, with a relative humidity below 80% and no corrosive gases present.

Usage

Place the DS-ZF1 evaporative sensor and stainless steel cylinder holder in the evaporating dish, and use three adjustment screws to adjust the chassis plane to a horizontal state. Inject water into the evaporating dish until the water level reaches the high water level mark of the sensor.

application area

Suitable for meteorological, plant and seed cultivation units, agricultural research institutions and other departments.

Quality service commitment: 1. Warranty period of 18 months, lifetime free maintenance. 2. During the warranty period, except for human factors, we will repair or replace any defects or malfunctions caused by improper instrument design, materials, or processes free of charge. 3. Upon receiving notification from the user that the provided instrument has malfunctioned, we will respond within ten minutes. 4. Ensure timely provision of necessary spare parts and consumables to users at the most favorable prices