The opening and closing component of the electric plug valve is the gate, and the direction of movement of the gate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate valve has two sealing surfaces, and the two sealing surfaces of the commonly used mode gate valve form a wedge shape, and the wedge angle varies with the valve parameters.

Principle: There is a circular opening with a diameter on the gate plate, and the opening and closing of the gate plate causes the circular opening on the gate plate to completely detach and match the diameter.

Parameters of electric plug-in valve

Nominal diameter range: DN50-DN500

Nominal pressure range: 1.0MPa-1.6MPa

Material: cast steel, stainless steel

Gate material: 2Cr13, 201, 304, 316, 316L

Connection form: clamp type

Valve seat sealing ring: Nitrile rubber, EPDM rubber, Fluororubber

Welding 2Cr13, hard alloy

Packing seal: graphite packing, PTFE packing

The electric plug-in valve has a simple structure, flexible operation, light weight, no jamming, and is particularly suitable for conveying and regulating the flow rate of various solid materials and block and lump materials of about 50mm. It is not limited by angle during installation, easy to operate, and can adjust the scale at any time. It can be operated in both directions and is simple and flexible. The materials include carbon steel and stainless steel, and various non-standard plug valves can be customized according to customer needs.