The YD-TC series electric trolley oven has a unique hot air circulation method, good temperature uniformity, heavy-duty load-bearing trolley, and reliable and stable control system. Widely used in the production of dry-type transformers. We can customize automatic or manual trolleys according to customer requirements.

Structural material:
1.Outer wall material of oven: usingA3Cold rolled steel plate welding production, surface sprayed with silver gray hammer pattern self drying paint after treatment
2.Studio materials:A3Cold rolled steel plate, coated with high-temperature resistant silver powder paint on the surface
3.Strengthening materials:5#Angle steel and8#Channel steel reinforcement
4.Layered inside the box: The box is not divided. Configure one electric trolley
5.Oven bottom belt2The guide rail extends to the outside of the box, making it easy to push the trolley into and out of the drying area

Size specifications:
1.Drying area size: (depth)*wide*High)3000mm * 2000mm * 1800mm can be customized to any size
2.Operating temperature: room temperature-250degree
3.Rated power54KW

Load carrying flatbed trolley (trolley): The trolley is made of welded channel steel, and the surface can be flattened with steel plates according to customer needs, which can withstand2.5TThe above gravity. Eight load-bearing track pulleys are installed at the bottom of the trolley, which are flexible and convenient for the entry and exit of materials such as motors, improving the efficiency of product use

Oven temperature control section:
1.Temperature controller: using intelligent temperature control instruments,PIDAdjustment, with automatic temperature control and constant temperature function.LEDDisplay, Instrument
The upper row represents the actual temperature inside the box, while the lower row represents the temperature set by the user. When the actual temperature inside the box is the same as the set temperature
It can achieve temperature to start timing and time to alarm prompt. (Temperature can be controlled in stages and at different times according to customer requirements)
2.Heating element: adopts a tubular heating tube, and the shell material is carbon steel pipe.
3.Installation position of heating tube: inside the air ducts on both sides of the oven liner
4.Oven operating temperature: room temperature--250Degree, maximum achievable300Degree, adjustable at will
5.Temperature control sensitivity: positive or negative1degree
6.Heating rate:5--6degree/minHot air circulation section:
1.Blower motor:6The high-power blower motor is installed at the top of the oven
2.Air supply method: Strong pressure air supply method means that the oven is equipped with guide ports on both sides, and hot air is discharged from the guide ports on the left and right sides of the box, with suction in the middle.
3.The top is equipped with a high-temperature resistant long shaft motor, and the wind turbine is connected to the motor to ensure that there is a large amount of hot air circulating inside the drying area, with constant temperature and timing function1SThe constant temperature time can be set arbitrarily between 99.99 hours, and at the same time, the heating power supply will be cut off and an alarm will be triggered.
Thermal insulation material between boxes: High temperature resistant aluminum silicate cotton is filled between the inner and outer walls of the oven equipment, with a thickness of100mm