Product NameClean oven | Dust free oven | Oxidation free clean oven | Nitrogen clean oven
Model:HA-JQKX45/-JQKX60/-JQKX490/-JQKX100
Specifications:Please refer to the technical specifications for details
applicablescope:
Suitable for dust-free heat treatment such as drying, curing, welding, annealing, etc. in semiconductor, electronic products, hardware products, medical and health care, instrumentation, factories, universities, scientific research and other departments
Product Features:
1. Sealing design: SUS304 stainless steel plate is used for the inner material, and the entire inner barrel is fully welded with argon arc welding. The box door is double sealed to prevent dust from entering the oven;
2. External dust prevention treatment: The external material is SPCC steel plate, which has been washed with soda water and treated with powder coating to prevent the generation of fine dust;
3. High efficiency filter: HEPA filter is used to construct cleanrooms with cleanliness levels below 100;
4. Internal circulation air design: forced air supply for internal circulation to ensure uniform temperature;
5. Energy saving: The insulation material is high-density fiber cotton, which has good insulation effect;
6. The inner box layer board can be freely removed and the height can be adjusted;
7. Internal dust-free accessories: All internal structural accessories are made of non oxidizing and dust-free materials;
8. Outer box sealing: The outer box structure adopts a special sealing structure design to ensure its harmony with the clean room;
9. Wide temperature range selection, faster heating rate;
10. Structural design that is easy to repair and replace.
Technical Specifications:
|
model Specifications |
HA-JQKX45 (A) |
HA-JQKX60 (A) |
HA-JQKX90 (A) |
HA-JQKX100 (A) |
||||||||||||||||
Inner box size (W × D × H) mm |
450*400*400 |
500*500*600 |
600*500*900 |
800*600*1000 |
||||||||||||||||
Dimensions (W × D × H) mm |
Based on the actual product (the outer box size also varies depending on the temperature) |
|||||||||||||||||||
Working temperature range |
A: Room temperature~260 ℃ |
|||||||||||||||||||
machine performance |
Analysis accuracy |
0.1℃ |
||||||||||||||||||
uniformity of distribution |
±2.0℃% |
|||||||||||||||||||
|
warm up time |
℃ |
260 |
400 |
500 |
600 |
260 |
400 |
500 |
600 |
260 |
400 |
500 |
600 |
260 |
400 |
500 |
600 |
|||
min |
45 |
50 |
60 |
70 |
45 |
50 |
60 |
70 |
45 |
50 |
60 |
70 |
45 |
50 |
60 |
70 |
||||
material |
External material |
SPCC steel plate powder baking paint treatment/SUS304 stainless steel plate |
||||||||||||||||||
Internal material |
SUS # 304 stainless steel CNC bending forming |
|||||||||||||||||||
thermal insulation material |
Glass fiber cotton/ceramic fiber cotton |
|||||||||||||||||||
sealing material |
Adopting high-temperature resistant and clean silicone rubber |
|||||||||||||||||||
Heating method |
Hot air circulation/thermal radiation |
|||||||||||||||||||
heater |
Dust free high-speed heater |
|||||||||||||||||||
filter |
Adopting high temperature resistant HEPA high-efficiency filter |
|||||||||||||||||||
cleanliness level |
Class100/ Class1000/ Class10000/ Class100000 |
|||||||||||||||||||
timer |
0.1S~9999H |
|||||||||||||||||||
thermostat |
Ordinary standard program type/touch screen PLC program control type |
|||||||||||||||||||
Other accessories |
Multi layer reinforced glass window (limited to below 260 degrees), compartment shelf (two pieces) |
|||||||||||||||||||
safety device |
Circuit system load protection, fan overload protection, heating cut-off when the temperature reaches the timer, fault warning light |
|||||||||||||||||||
Optional accessories |
① Recorder; ② Oxygen content analyzer; ③ Nitrogen system; ④ Test hole with a diameter of 50mm; ⑤ Three color warning light; ⑥ Air cooling system; ⑦ Cart |
|||||||||||||||||||
Power supply (V) |
220 |
AC 3-phase 5-wire 380V 50HZ |
||||||||||||||||||
|
Note: 1. The above data are all at an ambient temperature (QT) of 25 ℃ Measured under no-load conditions in the studio;
| ||||||||||||||||||||
