Fixed-point inspection mode

When conducting long-term inspections or large-scale inspections, there are some locations and equipment that must be inspected, and installing ordinary inspection points will increase the difficulty and cost of construction. So the GPS inspector has added a fixed-point mode. At the location to be inspected, the GPS inspector first collects the latitude and longitude information of the location, and then edits and processes this information through software before downloading it to the GPS inspector. This way, when the inspection arrives at the location, the location name will be directly displayed.

Trajectory inspection mode

The GPS inspection device will collect latitude and longitude information at intervals (adjustable) during the user's line inspection process. These latitude and longitude information will form the trajectory of the line inspection. The management center needs to check whether the inspection personnel are inspecting the line according to the prescribed route to complete the assessment of the inspection personnel. The trajectory inspection mode solves the installation of a large number of sampling and patrol points.

Card reading mode

Indoor inspections do not have GPS signals. In order not to affect the need for simultaneous indoor and outdoor inspections, the GPS inspection device has added a card reading function. Install patrol points in indoor areas that need to be inspected, and use a GPS patrol device to read the card at each location. The patrol device will automatically record the location name and the time of arrival.

In traditional inspections, managers are unable to understand the situation of the inspection site (equipment aging, accidents). In order to achieve effective supervision of the inspection process, the camera function of GPS inspectors solves such problems. Equipped with a 13 megapixel autofocus camera, it can capture photos with a resolution of up to 4160 * 3120 without distortion when zoomed in. Managers can have a thorough understanding of the inspection equipment and line conditions through detailed photos.

Customized Inspection APP

Inspection management is not limited to supervising whether the inspection personnel are in place, but more importantly, it is about identifying potential equipment hazards. Therefore, during the inspection process, it is crucial to keep detailed records of the equipment's operating status. The collection of data such as pressure, temperature, rotation speed, and aging degree determines whether production can operate normally. Tailored inspection apps based on users' actual usage needs can obtain real data that truly meets enterprise management requirements, in order to effectively implement safety inspections and eliminate hidden dangers.

The design of the call function enables inspection personnel to report the on-site situation to their superiors in a timely manner when encountering emergency situations, and managers can also make correct commands in a timely manner, thereby minimizing accident losses. By downloading 10 fixed sets of phone numbers (expandable) through software, the inspector can only make phone calls to pre stored numbers. Similarly, only the pre stored 10 sets of phones can make calls to this patrol machine, which can effectively save phone costs and avoid harassing calls. Dr. J's 7GPS inspection device can also pre store 10 sets of text messages, which can be downloaded in advance according to management needs for replying to the management center. The short message function is mainly used for the management center to issue notifications, facilitating timely understanding of the unified arrangements of the management center.