The cutting machine has good stability, high precision, easy operation, and continuous and uniform slicing.

Main technical parameters of the cutting machine:

◆ Power: 0.37kw
Slice frequency: 560 slices/min
Motor speed: 1400 revolutions per minute
Slice thickness: 0.2-3mm
◆ Weight: 12.5KG
◆ Voltage: 220V
◆ Dimensions: 300×180×240mm

Detailed introduction of the cutting machine:

instructions

This machine is equipped with a single-phase motor, high-end bearings, and four blades installed on the disc. It has a slow speed ratio and high slicing efficiency. The slicing thickness can be adjusted, and it is widely used in traditional Chinese medicine pharmacies, drugstores, Chinese medicine processing plants, etc. This machine has the characteristics of small size, high efficiency, easy operation, exquisite and beautiful appearance, and is both energy-saving and safe.

2、 Instructions for using the cutting machine

1. Adjustment: When adjusting, first loosen the fixed copper column nut, then rotate the nut to adjust the thickness direction on the copper column. After adjusting the thickness, the nut must be tightened to the copper column. If the disc is parallel to the blade, do not turn on the machine. The cutterhead must be lower than the blade in order to start cutting. Adjust to a maximum thickness of about 3mm, and for thinner ones, adjust infinitely.
2. Replace blade: Insert the hexagonal handle into the hole on the side of the machine. Rotate to adjust the direction of the wheel before changing the knife. When changing the knife, loosen the two hexagonal screws of the blade and insert the blade for replacement.

3、 Precautions

1. The knife basin should be regularly oiled to avoid sticking dirt. If there are pills with tails or fine fragments, it indicates that the softening is not appropriate or the blade is not sharp, and must be replaced or sharpened. It's too thin to cut properly.
2. Slices of sticky medicines such as sweet clouds, raw earth, ginseng, gastrodia elata, etc., with water on the surface for cutting.