Computer display microhardness testerThe MVC-1000JMT1/MVC-1000JMT2 computer display microhardness tester is a hardness tester that combines precision machinery with specialized software for optics, electronics, and computers. It can be used to test Vickers or Knoop hardness by inputting the measured diagonal values into the local integrated calculator, or by transmitting the measurement image to the computer to calculate the hardness value.

Computer display microhardness tester MVC-1000JMT1/MVC-1000JMT2The machine adopts a high magnification optical measurement system, and the eyepiece drum reads once. Can measure steel, non-ferrous metalsICDepth and hardness gradient of thin sheets, thin plastics, metal sheets, coatings, surface coatings, laminated metals, heat-treated carbonized layers, and quenched and hardened layers.

Computer display microhardness tester MVC-1000JMT1/MVC-1000JMT2Technical Parameter

1Microhardness ruler:HV0.01,HV0.025,HV0.05,HV0.1,HV0.3,HV0.5,HV1

2Display:Holding time (seconds), hardness value

3Experimental force(gf):10，25，50，100，200，300，500，1000

4Loading control:Automatic (loading)/maintain/Uninstall)

5Test force holding time(s):5～60

6Selection of experimental force:External force selection knob, automatic display of test force onLCDOn screen

7Objective lens:10×，40×

8Eyepiece magnification factor:10×

9Total magnification factor(μm):100(Observation), four hundred(Measurement)

10Measurement range(μm):200

11Resolution(μm):0.25

12Measurement range:(5-3000)HV

13、XYTest bench size(mm):100×100

Travel Range(mm):25×25

MINIMUM READING(mm):0.01

14Maximum height of the specimen(mm):85（2.55")

15Maximum width of the specimen(mm):120(3.35")(Distance from the centerline of the pressure head to the machine wall

16Power supply voltage:AC220V/50HZ

17External dimensions(mm):490×310×515

18Weight(kg):35