This machine is mainly composed of a bottle clamp belt, a conveyor belt, and a two water and two air cleaning unit. It can be combined with a single machine such as an oven and a filling machine to form an automatic production line, or used separately for bottle washing. The bottles are fed into the conveyor belt through a bottle clamp belt, and then flipped into the cleaning system by the clamp belt. After being pressurized by a sanitary pump, water is injected for the washing process, and a needle is inserted into the bottle cavity to flush clean air, completing the two water and two air cleaning process. This machine has the characteristics of easy specification replacement and good bottle washing quality.

　　Circular bottle drum washing machineIt is a device developed according to the needs of the food industry and in combination with the advantages of similar models at home and abroad. It is mainly used for bottle washing in Pickled vegetables, pickles, cans and other food industries. It is suitable for blowing and washing glass bottles and plastic bottles with high strength. It can be used for bottles of different diameters and heights by changing small sizes according to the needs of users. It is suitable for food, medicine, cosmetics, chemical products and other industries.

Suitable for cleaning the inside and outside of circular bottles or irregularly shaped bottles with shoulder rests. The bottle is alternately rinsed with two water and one gas (purified water injection water, purified gas) to meet the production process requirements, and the bottle is preliminarily dried. According to production requirements, an ultrasonic device can be optionally selected

　　Circular bottle drum washing machineCharacteristics:

1. Structure *, using mechanical templates to fix the bottles, washing them separately, resulting in low bottle loss rate.

2. The cleaning process is reasonable, and the cleanliness of the bottles after washing is high.

3. Water consumption will decrease in the coming year.

4. Easy to operate and convenient to maintain.

5. It can be produced independently or used for linked production lines.

6. Meets GMP requirements.

Main technical parameters:

1. Applicable bottle specifications: 2-500ml various glass or plastic bottles

2. Power supply: 380V 50HZ

3. Electric power consumption: 1.2KW

4. Pure water injection water pressure: 0.4Mpa

5. Pure water consumption: 0.7m3/h

6. Injection water consumption: 0.7m3/h

7. Clean compressed air pressure: 0.3-0.4Mpa

8. Clean compressed air consumption: 40m3/h

9. Single port noise: ≤ 70db

10. Weight: Approximately 600Kg

11. Dimensions: 1450 * 1200 * 1500 (mm)

Production capacity:

40-120 bottles/minute (depending on bottle specifications)