Keminiel Neutralizer BlenderExplanation of Zhonghe Pool
Neutralization tank is a tank used for regulating the concentration of acid and alkali in sewage treatment. Often, the wastewater discharged from factories is not neutral, some is acidic and some is alkaline. After homogenization in the homogenization tank, the acidity and alkalinity of the wastewater remain relatively stable within a certain equilibrium range. To carry out wastewater treatment, acid-base neutralization is also required. There are many methods for neutralization, and different methods are targeted at different wastewater treatments. If neutralization treatment is not carried out, the acidic and alkaline wastewater will corrode the equipment and be not conducive to the next step of wastewater purification.
The neutralization methods generally include drug neutralization, acid-base wastewater neutralization, and acidic wastewater filtration neutralization. During the neutralization adjustment process, a mixer is required for mixing to achieve uniform and dispersed pH values in the wastewater; Therefore, the mixer used in the neutralization tank is also known as the neutralization mixer

Keminiel Neutralizer Blender—Selection parameters
1. Pool size: length, width, height, and liquid level height
2. Medium
3. Overflow (single pool processing capacity)
4. Other special requirements
5. Solid-liquid phase

Keminiel Neutralizer Blender- Equipment key points
1. Reducer: Most water plants use commercial reducers such as SEW to match with mixers, but the compatibility is poor. Commercial reducers need to be reinforced at the bottom of the mixer to increase its torque and load, otherwise it is easy to cause damage to the reducer, which actually increases operation and maintenance costs.
2. Material of the shaft: Consider the material of the circumference according to different media, such as 304SS, 316L, etc., to achieve corrosion resistance.
3. Blade material: the same applies
4. Blade shape: There are single-layer, multi blade, two blade, three blade, four blade and other types of blades. Currently, most agitator manufacturers use high-efficiency blades, and the shape of the blades is more suitable for mixing requirements.
5. Motor: Select different power motors according to different design loads.
6. Fence, etc