Central transmission suspended mud scraper-Global supplier

No. 192, Bianzhong East Road, Chengqiao Street, Liuhe District, Nanjing City, Jiangsu Province, China

1Central transmission suspended mud scraperbrief introduction

The suspended center drive scraper is suitable for the collection and removal of sludge and floating slag in radial flow sedimentation tanks in sewage treatment projects. It is a center drive suspended structure that does not require a central support pier, simplifying the civil engineering structure. Commonly used for pool diameters ranging from 3 meters to 16 meters.

2、 Technical parameters of central transmission suspended scraper

3、 Characteristics of Central Transmission Suspension Mud Scraper

1. This device is a central transmission suspension structure that does not require a central support pier. It has no requirements for the levelness and strength of the road surface around the pool top, and has a simple structure.

2. The structure is simple to use, easy to maintain, and has low operating costs.

3. Double overload protection, reliable operation.

4. It can further separate the free water in the concentrated sludge, reduce the sludge volume, improve the sludge concentration effect, and facilitate the improvement of sedimentation efficiency.

4、 Structure and Working Principle of Central Transmission Suspended Mud Scraper

The suspended center drive scraper is composed of a vertical reducer with an electric motor, a rotary bearing, a main shaft, a scraper arm, a scraper, a steady flow cylinder, a control cabinet, etc.

The scraper arm rotates around the central axis driven by the driving device, and the scraper plate on the scraper arm pushes the sludge deposited at the bottom of the pool from the outside to the inside towards the collection pit at the center of the pool. During operation, if the scraper or scraper arm gets stuck due to foreign objects or accumulates too much mud, the transmission may become too twisted. The over twist protection mechanism will activate, cut off the power supply, and automatically sound an alarm to stop the machine.

5、 Operating Instructions for Central Transmission Suspension Mud Scraper

1. Preparation before startup: Check whether the gearbox has been refueled to the normal oil level and whether there are any foreign objects stuck on the water surface during operation. There should be no wooden blocks or other foreign objects on the water surface to avoid malfunctions during operation.

2. Connect the motor power supply and check the forward and reverse rotation.

3. After one month of use, the oil in the gearbox needs to be changed once, and only once a year thereafter.

4. During the operation of the equipment, regular attention should be paid to whether it is running normally. If any problems are found, the operation should be stopped in a timely manner for inspection.